ditched wireless, went wired and still no internet
Re: ditched wireless, went wired and still no internet
Using ifconfig_fxp0 doesn't seems to work with that line. Using ifconfig_alc0 allows me to disable and reenable the networking but I still get ether 00:00:00:00:00:00 on my ifconfig output but the inet is now 192.268.0.14 with a broadcast of 192.268.0.255
Re: ditched wireless, went wired and still no internet
My modem admin page show nothing connected by the Ethernet.
Re: ditched wireless, went wired and still no internet
My modem admin page show nothing connected by the Ethernet. I suppose I could try adding the static address using e MAC address of my computer and the .14 IP address in the modem admin page,
Re: ditched wireless, went wired and still no internet
I did not specified that the replacement is in the /etc/rc.conf file.
alc0 is the right driver, but for the IP it might not work for you, also I had give you wrong line replace ifconfig_alc0="DHCP" in /etc/rc.conf its
Also this page might help you to further to fix this issue http://sleepyhead.de/howto/?href=network.
Can you give me the output of netstat -in please?
alc0 is the right driver, but for the IP it might not work for you, also I had give you wrong line replace ifconfig_alc0="DHCP" in /etc/rc.conf its
Code: Select all
ifconfig_alc0="inet 192.168.0.14 netmask 255.255.255.0"
Can you give me the output of netstat -in please?
Re: ditched wireless, went wired and still no internet
Im in but im not sure how. On ghost-bsd though.
I did an ifconfig alc0 link my:computer's:mac:address:in:here
then went back into rc.conf and edited that line back to ifconfig_alc0="DHCP"
and it shows up. at ip address .20
I did an ifconfig alc0 link my:computer's:mac:address:in:here
then went back into rc.conf and edited that line back to ifconfig_alc0="DHCP"
and it shows up. at ip address .20
Re: ditched wireless, went wired and still no internet
well the internet connection survived the reboot but the ipaddress has changed and the mac address is still empty. Also the modem doesn't show the device as active yet i am using it on the interne now. Works. don't know how but it works.
Re: ditched wireless, went wired and still no internet
The mac address can be all zero and it will work you can also change it for what ever you want.
Code: Select all
ifconfig alc0 down
ifconfig alc0 link 00:01:02:03:04:05
ifconfig alc0 up