I have two questions concerning the system-config-printer utility.
Firstly, after a printer is installed (in my case an hp all-in-one printer), when you select the icon of the printer and right-click to select "properties", the printer properties window will not open as per usual. I suspect a missing package?
Also, in the same system-config-printer utility, using the "add printer" function, the "windows printer via samba" browse button is not available. It says it requires "pysmbc" to function, however there is no "pysmbc" package to be found. I need it to access a windows print server/imagesetter on my LAN via samba
Would anyone know what package(s) would be needed for either of the above?
Thanks.
system-config-printer utility problems
Re: system-config-printer utility problems
It is a lot of time I do not configure printers on smb networks, however you should be able to configure the printer by specifying the complete URI:
smb://192.168.0.xx/group/shared_name
That should work even if system-config-printer is not "fully featured".
smb://192.168.0.xx/group/shared_name
That should work even if system-config-printer is not "fully featured".
Re: system-config-printer utility problems
Thanks for the reply.
I can set up the printer this way, however when I try to send a test page, it returns an error "Can't load /usr/local/etc/smb4.conf - run testparm to debug it"
Testparm returns with "Error loading services". Any ideas?
I can set up the printer this way, however when I try to send a test page, it returns an error "Can't load /usr/local/etc/smb4.conf - run testparm to debug it"
Testparm returns with "Error loading services". Any ideas?
Re: system-config-printer utility problems
Hmm ... I guess you need to install samba pkg ...not sure really, but you can try.madbox wrote:Thanks for the reply.
I can set up the printer this way, however when I try to send a test page, it returns an error "Can't load /usr/local/etc/smb4.conf - run testparm to debug it"
Testparm returns with "Error loading services". Any ideas?
Re: system-config-printer utility problems
Ok ASX, you were warm... samba44 was indeed installed but not enabled.
So after editing: samba_server_enable="YES" to /etc/rc.conf
and create a file:/usr/local/etc/smb4.conf
And in terminal: service samba_server start
We are good to go.
Also I realize that if you use the cups administrator utility in your browser, for example (https://localhost:631/printers/), you have much more control over LAN/printing than the system-config-printer utility, but still it would be nice if the properties section was functional in system-config-printer. There is definitely a bug there.
Maybe installing system-config-printer from ports would be better, but that's another topic.
So after editing: samba_server_enable="YES" to /etc/rc.conf
and create a file:/usr/local/etc/smb4.conf
And in terminal: service samba_server start
We are good to go.
Also I realize that if you use the cups administrator utility in your browser, for example (https://localhost:631/printers/), you have much more control over LAN/printing than the system-config-printer utility, but still it would be nice if the properties section was functional in system-config-printer. There is definitely a bug there.
Maybe installing system-config-printer from ports would be better, but that's another topic.
Re: system-config-printer utility problems
Maybe there is a bug, I guess not many GhostBSD/FreeBSD users run a smb network, so these thing went unnoticed or not reported.madbox wrote:Ok ASX, you were warm... samba44 was indeed installed but not enabled.
So after editing: samba_server_enable="YES" to /etc/rc.conf
and create a file:/usr/local/etc/smb4.conf
And in terminal: service samba_server start
We are good to go.
Also I realize that if you use the cups administrator utility in your browser, for example (https://localhost:631/printers/), you have much more control over LAN/printing than the system-config-printer utility, but still it would be nice if the properties section was functional in system-config-printer. There is definitely a bug there.
Entirely possible that there are options that might be interesting, in which case I invite you to post about, here, or better on our tracker http://issues.ghostbsd.org, so that we have a chance to improve our reposMaybe installing system-config-printer from ports would be better, but that's another topic.