Just tried a few minutes ago. When I tried to log on (gdm?), an ominous graphic informed me that "Something has gone wrong," and that I should "contact (my) System Administrator." Here's my Xorg.0.log:
Code: Select all
[ 54.436]
X.Org X Server 1.17.4
Release Date: 2015-10-28
[ 54.436] X Protocol Version 11, Revision 0
[ 54.436] Build Operating System: FreeBSD 10.1-RELEASE-p24 i386
[ 54.436] Current Operating System: FreeBSD Eowyn-Ghost 10.1-RELEASE-p24 FreeBSD 10.1-RELEASE-p24 #0: Mon Nov 2 12:02:13 UTC 2015 root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC i386
[ 54.436] Build Date: 05 December 2015 01:38:28AM
[ 54.436]
[ 54.436] Current version of pixman: 0.32.8
[ 54.436] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 54.436] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 54.436] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Dec 18 06:13:12 2015
[ 54.505] (==) Using system config directory "/usr/local/share/X11/xorg.conf.d"
[ 54.505] (==) No Layout section. Using the first Screen section.
[ 54.505] (==) No screen section available. Using defaults.
[ 54.505] (**) |-->Screen "Default Screen Section" (0)
[ 54.505] (**) | |-->Monitor "<default monitor>"
[ 54.512] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 54.512] (==) Automatically adding devices
[ 54.512] (==) Automatically enabling devices
[ 54.512] (==) Not automatically adding GPU devices
[ 54.648] (==) FontPath set to:
/usr/local/share/fonts/misc/,
/usr/local/share/fonts/TTF/,
/usr/local/share/fonts/OTF/,
/usr/local/share/fonts/Type1/,
/usr/local/share/fonts/100dpi/,
/usr/local/share/fonts/75dpi/
[ 54.648] (==) ModulePath set to "/usr/local/lib/xorg/modules"
[ 54.648] (II) The server relies on devd to provide the list of input devices.
If no devices become available, reconfigure devd or disable AutoAddDevices.
[ 54.648] (II) Loader magic: 0x8232070
[ 54.648] (II) Module ABI versions:
[ 54.648] X.Org ANSI C Emulation: 0.4
[ 54.648] X.Org Video Driver: 19.0
[ 54.648] X.Org XInput driver : 21.0
[ 54.648] X.Org Server Extension : 9.0
[ 54.663] (--) PCI:*(0:0:2:0) 8086:2a42:17aa:20e4 rev 7, Mem @ 0x80000000/4194304, 0xd0000000/268435456, I/O @ 0x00005c00/8, BIOS @ 0x????????/65536
[ 54.663] (--) PCI: (0:0:2:1) 8086:2a43:17aa:20e4 rev 7, Mem @ 0xfdb00000/1048576
[ 54.663] (II) LoadModule: "glx"
[ 54.710] (II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so
[ 54.868] (II) Module glx: vendor="X.Org Foundation"
[ 54.868] compiled for 1.17.4, module version = 1.0.0
[ 54.868] ABI class: X.Org Server Extension, version 9.0
[ 54.868] (==) AIGLX enabled
[ 54.868] (==) Matched intel as autoconfigured driver 0
[ 54.868] (==) Matched fbdev as autoconfigured driver 1
[ 54.869] (==) Matched vesa as autoconfigured driver 2
[ 54.869] (==) Assigned the driver to the xf86ConfigLayout
[ 54.869] (II) LoadModule: "intel"
[ 54.869] (II) Loading /usr/local/lib/xorg/modules/drivers/intel_drv.so
[ 54.917] (II) Module intel: vendor="X.Org Foundation"
[ 54.917] compiled for 1.17.2, module version = 2.21.15
[ 54.917] Module class: X.Org Video Driver
[ 54.917] ABI class: X.Org Video Driver, version 19.0
[ 54.917] (II) LoadModule: "fbdev"
[ 54.925] (WW) Warning, couldn't open module fbdev
[ 54.925] (II) UnloadModule: "fbdev"
[ 54.925] (II) Unloading fbdev
[ 54.926] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 54.926] (II) LoadModule: "vesa"
[ 54.926] (II) Loading /usr/local/lib/xorg/modules/drivers/vesa_drv.so
[ 54.930] (II) Module vesa: vendor="X.Org Foundation"
[ 54.930] compiled for 1.17.2, module version = 2.3.4
[ 54.930] Module class: X.Org Video Driver
[ 54.930] ABI class: X.Org Video Driver, version 19.0
[ 54.931] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[ 54.933] (II) VESA: driver for VESA chipsets: vesa
[ 54.934] (--) Using syscons driver with X support (version 2.0)
[ 54.934] (++) using VT number 9
[ 56.938] (WW) Falling back to old probe method for vesa
[ 56.938] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 56.938] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 56.938] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 56.938] (==) intel(0): RGB weight 888
[ 56.938] (==) intel(0): Default visual is TrueColor
[ 56.938] (--) intel(0): Integrated Graphics Chipset: Intel(R) GM45
[ 56.938] (**) intel(0): Relaxed fencing enabled
[ 56.938] (**) intel(0): Wait on SwapBuffers? enabled
[ 56.938] (**) intel(0): Triple buffering? enabled
[ 56.938] (**) intel(0): Framebuffer tiled
[ 56.938] (**) intel(0): Pixmaps tiled
[ 56.938] (**) intel(0): 3D buffers tiled
[ 56.938] (**) intel(0): SwapBuffers wait enabled
[ 56.939] (==) intel(0): video overlay key set to 0x101fe
[ 56.946] (II) intel(0): Output LVDS1 has no monitor section
[ 56.953] (II) intel(0): Output VGA1 has no monitor section
[ 56.957] (II) intel(0): Output HDMI1 has no monitor section
[ 56.957] (II) intel(0): Output DP1 has no monitor section
[ 56.966] (II) intel(0): Output DP2 has no monitor section
[ 56.979] (II) intel(0): EDID for output LVDS1
[ 56.979] (II) intel(0): Manufacturer: LEN Model: 4031 Serial#: 0
[ 56.979] (II) intel(0): Year: 2007 Week: 0
[ 56.979] (II) intel(0): EDID Version: 1.3
[ 56.979] (II) intel(0): Digital Display Input
[ 56.979] (II) intel(0): Max Image Size [cm]: horiz.: 30 vert.: 19
[ 56.979] (II) intel(0): Gamma: 2.20
[ 56.979] (II) intel(0): DPMS capabilities: StandBy Suspend Off
[ 56.979] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 56.979] (II) intel(0): First detailed timing is preferred mode
[ 56.979] (II) intel(0): redX: 0.569 redY: 0.332 greenX: 0.312 greenY: 0.544
[ 56.979] (II) intel(0): blueX: 0.149 blueY: 0.132 whiteX: 0.313 whiteY: 0.329
[ 56.979] (II) intel(0): Supported established timings:
[ 56.979] (II) intel(0): 640x480@60Hz
[ 56.979] (II) intel(0): 800x600@60Hz
[ 56.979] (II) intel(0): 1024x768@60Hz
[ 56.979] (II) intel(0): Manufacturer's mask: 0
[ 56.980] (II) intel(0): Supported detailed timing:
[ 56.980] (II) intel(0): clock: 69.5 MHz Image Size: 303 x 190 mm
[ 56.980] (II) intel(0): h_active: 1280 h_sync: 1332 h_sync_end 1396 h_blank_end 1416 h_border: 0
[ 56.980] (II) intel(0): v_active: 800 v_sync: 803 v_sync_end 806 v_blanking: 818 v_border: 0
[ 56.980] (II) intel(0): Supported detailed timing:
[ 56.980] (II) intel(0): clock: 57.7 MHz Image Size: 303 x 190 mm
[ 56.980] (II) intel(0): h_active: 1280 h_sync: 1332 h_sync_end 1396 h_blank_end 1384 h_border: 0
[ 56.980] (II) intel(0): v_active: 800 v_sync: 803 v_sync_end 806 v_blanking: 834 v_border: 0
[ 56.980] (II) intel(0): Unknown vendor-specific block f
[ 56.980] (II) intel(0): LTN141AT10-G
[ 56.980] (II) intel(0): EDID (in hex):
[ 56.980] (II) intel(0): 00ffffffffffff0030ae314000000000
[ 56.980] (II) intel(0): 00110103801e1378eacd7591554f8b26
[ 56.980] (II) intel(0): 21505421080001010101010101010101
[ 56.980] (II) intel(0): 010101010101261b0088502012303440
[ 56.980] (II) intel(0): 33002fbe100000198b16006850202230
[ 56.980] (II) intel(0): 344033002fbe100000190000000f0081
[ 56.980] (II) intel(0): 0a32810a281201004ca35731000000fe
[ 56.980] (II) intel(0): 004c544e313431415431302d470a00aa
[ 56.980] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 56.980] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 56.980] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 56.980] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 56.980] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 56.980] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 56.980] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 56.980] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 56.980] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 56.980] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 56.980] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 56.980] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 56.980] (II) intel(0): Printing probed modes for output LVDS1
[ 56.980] (II) intel(0): Modeline "1280x800"x60.0 69.50 1280 1332 1396 1416 800 803 806 818 -hsync -vsync (49.1 kHz eP)
[ 56.980] (II) intel(0): Modeline "1280x800"x49.5 57.71 1280 1332 1396 1397 800 803 806 834 -hsync -vsync (41.3 kHz e)
[ 56.980] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 56.980] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 56.980] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 56.980] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 56.980] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 56.987] (II) intel(0): EDID for output VGA1
[ 56.991] (II) intel(0): EDID for output HDMI1
[ 56.991] (II) intel(0): EDID for output DP1
[ 57.000] (II) intel(0): EDID for output DP2
[ 57.000] (II) intel(0): Output LVDS1 connected
[ 57.000] (II) intel(0): Output VGA1 disconnected
[ 57.000] (II) intel(0): Output HDMI1 disconnected
[ 57.000] (II) intel(0): Output DP1 disconnected
[ 57.000] (II) intel(0): Output DP2 disconnected
[ 57.000] (II) intel(0): Using exact sizes for initial modes
[ 57.000] (II) intel(0): Output LVDS1 using initial mode 1280x800
[ 57.000] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 57.000] (II) intel(0): Kernel page flipping support detected, enabling
[ 57.000] (==) intel(0): DPI set to (96, 96)
[ 57.000] (II) Loading sub module "fb"
[ 57.000] (II) LoadModule: "fb"
[ 57.001] (II) Loading /usr/local/lib/xorg/modules/libfb.so
[ 57.019] (II) Module fb: vendor="X.Org Foundation"
[ 57.019] compiled for 1.17.4, module version = 1.0.0
[ 57.019] ABI class: X.Org ANSI C Emulation, version 0.4
[ 57.019] (II) Loading sub module "dri2"
[ 57.019] (II) LoadModule: "dri2"
[ 57.019] (II) Module "dri2" already built-in
[ 57.019] (II) UnloadModule: "vesa"
[ 57.019] (II) Unloading vesa
[ 57.019] (==) Depth 24 pixmap format is 32 bpp
[ 57.020] (II) intel(0): [DRI2] Setup complete
[ 57.020] (II) intel(0): [DRI2] DRI driver: i965
[ 57.020] (II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled
[ 57.037] (II) UXA(0): Driver registered support for the following operations:
[ 57.037] (II) solid
[ 57.037] (II) copy
[ 57.037] (II) composite (RENDER acceleration)
[ 57.037] (II) put_image
[ 57.037] (II) get_image
[ 57.037] (==) intel(0): Backing store enabled
[ 57.037] (==) intel(0): Silken mouse enabled
[ 57.038] (II) intel(0): Initializing HW Cursor
[ 57.038] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 57.047] (==) intel(0): DPMS enabled
[ 57.047] (==) intel(0): Intel XvMC decoder enabled
[ 57.047] (II) intel(0): Set up textured video
[ 57.060] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 57.060] (II) intel(0): direct rendering: DRI2 Enabled
[ 57.097] (--) RandR disabled
[ 57.342] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 57.342] (II) AIGLX: enabled GLX_ARB_create_context
[ 57.342] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 57.342] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 57.342] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 57.342] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 57.342] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 57.342] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 57.342] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 57.343] (II) AIGLX: Loaded and initialized i965
[ 57.343] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 57.343] (II) intel(0): Setting screen physical size to 338 x 211
[ 57.887] (II) config/devd: probing input devices...
[ 57.887] (II) config/devd: adding input device (null) (/dev/kbdmux)
[ 57.887] (II) LoadModule: "kbd"
[ 57.887] (II) Loading /usr/local/lib/xorg/modules/input/kbd_drv.so
[ 57.897] (II) Module kbd: vendor="X.Org Foundation"
[ 57.897] compiled for 1.17.2, module version = 1.8.1
[ 57.897] Module class: X.Org XInput Driver
[ 57.897] ABI class: X.Org XInput driver, version 21.0
[ 57.897] (II) Using input driver 'kbd' for 'kbdmux'
[ 57.897] (**) kbdmux: always reports core events
[ 57.897] (**) kbdmux: always reports core events
[ 57.898] (**) Option "Protocol" "standard"
[ 57.898] (**) Option "XkbRules" "base"
[ 57.898] (**) Option "XkbModel" "pc105"
[ 57.898] (**) Option "XkbLayout" "us"
[ 57.898] (**) Option "config_info" "devd:kbdmux"
[ 57.898] (II) XINPUT: Adding extended input device "kbdmux" (type: KEYBOARD, id 6)
[ 57.921] (II) config/devd: kbdmux is enabled, ignoring device atkbd0
[ 57.921] (II) config/devd: adding input device (null) (/dev/sysmouse)
[ 57.921] (II) LoadModule: "mouse"
[ 57.922] (II) Loading /usr/local/lib/xorg/modules/input/mouse_drv.so
[ 57.938] (II) Module mouse: vendor="X.Org Foundation"
[ 57.938] compiled for 1.17.2, module version = 1.9.1
[ 57.938] Module class: X.Org XInput Driver
[ 57.938] ABI class: X.Org XInput driver, version 21.0
[ 57.938] (II) Using input driver 'mouse' for 'sysmouse'
[ 57.938] (**) sysmouse: always reports core events
[ 57.938] (**) Option "Device" "/dev/sysmouse"
[ 57.938] (==) sysmouse: Protocol: "Auto"
[ 57.938] (**) sysmouse: always reports core events
[ 57.938] (==) sysmouse: Emulate3Buttons, Emulate3Timeout: 50
[ 57.938] (**) sysmouse: ZAxisMapping: buttons 4 and 5
[ 57.938] (**) sysmouse: Buttons: 5
[ 57.938] (**) Option "config_info" "devd:sysmouse"
[ 57.938] (II) XINPUT: Adding extended input device "sysmouse" (type: MOUSE, id 7)
[ 57.938] (**) sysmouse: (accel) keeping acceleration scheme 1
[ 57.938] (**) sysmouse: (accel) acceleration profile 0
[ 57.938] (**) sysmouse: (accel) acceleration factor: 2.000
[ 57.938] (**) sysmouse: (accel) acceleration threshold: 4
[ 57.938] (II) sysmouse: SetupAuto: hw.iftype is 4, hw.model is 0
[ 57.938] (II) sysmouse: SetupAuto: protocol is SysMouse
[ 57.938] (II) config/devd: device /dev/psm0 already opened
[ 63.519] (II) intel(0): EDID vendor "LEN", prod id 16433
[ 63.519] (II) intel(0): Printing DDC gathered Modelines:
[ 63.519] (II) intel(0): Modeline "1280x800"x0.0 69.50 1280 1332 1396 1416 800 803 806 818 -hsync -vsync (49.1 kHz eP)
[ 63.519] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 63.520] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 63.520] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 72.357] (II) intel(0): EDID vendor "LEN", prod id 16433
[ 72.357] (II) intel(0): Printing DDC gathered Modelines:
[ 72.357] (II) intel(0): Modeline "1280x800"x0.0 69.50 1280 1332 1396 1416 800 803 806 818 -hsync -vsync (49.1 kHz eP)
[ 72.357] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 72.357] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 72.357] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 96.869] (EE) intel(0): Detected a hung GPU, disabling acceleration.
[ 96.869] (EE) intel(0): When reporting this, please include i915_error_state from debugfs and the full dmesg.
[ 97.836] (II) intel(0): EDID vendor "LEN", prod id 16433
[ 97.836] (II) intel(0): Printing DDC gathered Modelines:
[ 97.836] (II) intel(0): Modeline "1280x800"x0.0 69.50 1280 1332 1396 1416 800 803 806 818 -hsync -vsync (49.1 kHz eP)
[ 97.836] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 97.837] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 97.837] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 99.648] (II) intel(0): EDID vendor "LEN", prod id 16433
[ 99.648] (II) intel(0): Printing DDC gathered Modelines:
[ 99.648] (II) intel(0): Modeline "1280x800"x0.0 69.50 1280 1332 1396 1416 800 803 806 818 -hsync -vsync (49.1 kHz eP)
[ 99.648] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 99.648] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 99.648] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 100.491] (II) intel(0): EDID vendor "LEN", prod id 16433
[ 100.491] (II) intel(0): Printing DDC gathered Modelines:
[ 100.491] (II) intel(0): Modeline "1280x800"x0.0 69.50 1280 1332 1396 1416 800 803 806 818 -hsync -vsync (49.1 kHz eP)
[ 100.491] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 100.491] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 100.491] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 102.288] (II) intel(0): EDID vendor "LEN", prod id 16433
[ 102.288] (II) intel(0): Printing DDC gathered Modelines:
[ 102.288] (II) intel(0): Modeline "1280x800"x0.0 69.50 1280 1332 1396 1416 800 803 806 818 -hsync -vsync (49.1 kHz eP)
[ 102.288] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 102.288] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 102.288] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 103.126] (II) intel(0): EDID vendor "LEN", prod id 16433
[ 103.126] (II) intel(0): Printing DDC gathered Modelines:
[ 103.126] (II) intel(0): Modeline "1280x800"x0.0 69.50 1280 1332 1396 1416 800 803 806 818 -hsync -vsync (49.1 kHz eP)
[ 103.126] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 103.126] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 103.126] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 104.943] (II) intel(0): EDID vendor "LEN", prod id 16433
[ 104.943] (II) intel(0): Printing DDC gathered Modelines:
[ 104.943] (II) intel(0): Modeline "1280x800"x0.0 69.50 1280 1332 1396 1416 800 803 806 818 -hsync -vsync (49.1 kHz eP)
[ 104.944] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 104.944] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 104.944] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 378.614] (II) config/devd: ignoring device umass0
[ 453.828] (II) config/devd: ignoring device umass0
Just noticed that X picked up some settings from the config file, but I don't have one that I know of. I do have two xorg.conf files, one suffixed .orig and the other .vbox (I think). For whatever it may be worth.