xorg Fatal server error
Posted: Fri Nov 26, 2021 4:49 pm
I'm trying to take a working version 12FreeBSD Ghost to the latest version.
I'm doing a whole disk format.
On trying to install Ghost on this pc after the xorg 'probe' finished I get
[EE] Fatal server error
cannot run in framebuffer mode
please specify BusID
The installer var/run/xorg.0.log says
Xinit giving up
failed to load module ati
/dev/dri/card0 not there
This motherboard doesn't have onboard graphics - a graphics card is attached.
Not sure what to do.
Couldn't find anything at wiki.x.org that seemed applicable...
Steve
Motherboard: Gigabyte Technology Co., Ltd.
Product Name: B450 AORUS ELITE
Graphic card information:
vendor='Advanced Micro Devices, Inc. [AMD/ATI]'
device='Caicos PRO [Radeon HD 7450]'
pciconf -l -c -v vgapci0@pci0:6:0:0
vgapci0@pci0:6:0:0: class=0x030000 card=0x30271043 chip=0x677b1002 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices, Inc. [AMD/ATI]'
device = 'Caicos PRO [Radeon HD 7450]'
...................Note as OEM = Caicos [R5 230 OEM]
class = display
subclass = VGA
cap 01[50] = powerspec 3 supports D0 D1 D2 D3 current D0
cap 10[58] = PCI-Express 2 legacy endpoint max data 256(256) RO NS
link x16(x16) speed 2.5(5.0) ASPM disabled(L0s/L1)
cap 05[a0] = MSI supports 1 message, 64 bit enabled with 1 message
ecap 000b[100] = Vendor 1 ID 1
ecap 0001[150] = AER 1 0 fatal 1 non-fatal 1 corrected
I'm doing a whole disk format.
On trying to install Ghost on this pc after the xorg 'probe' finished I get
[EE] Fatal server error
cannot run in framebuffer mode
please specify BusID
The installer var/run/xorg.0.log says
Xinit giving up
failed to load module ati
/dev/dri/card0 not there
This motherboard doesn't have onboard graphics - a graphics card is attached.
Not sure what to do.
Couldn't find anything at wiki.x.org that seemed applicable...
Steve
Motherboard: Gigabyte Technology Co., Ltd.
Product Name: B450 AORUS ELITE
Graphic card information:
vendor='Advanced Micro Devices, Inc. [AMD/ATI]'
device='Caicos PRO [Radeon HD 7450]'
pciconf -l -c -v vgapci0@pci0:6:0:0
vgapci0@pci0:6:0:0: class=0x030000 card=0x30271043 chip=0x677b1002 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices, Inc. [AMD/ATI]'
device = 'Caicos PRO [Radeon HD 7450]'
...................Note as OEM = Caicos [R5 230 OEM]
class = display
subclass = VGA
cap 01[50] = powerspec 3 supports D0 D1 D2 D3 current D0
cap 10[58] = PCI-Express 2 legacy endpoint max data 256(256) RO NS
link x16(x16) speed 2.5(5.0) ASPM disabled(L0s/L1)
cap 05[a0] = MSI supports 1 message, 64 bit enabled with 1 message
ecap 000b[100] = Vendor 1 ID 1
ecap 0001[150] = AER 1 0 fatal 1 non-fatal 1 corrected