Page 1 of 1

20.01 Fails on Booting from Install USB

Posted: Thu Feb 27, 2020 8:34 am
by BSDaemon2020
I've downloaded 20.01 and made an usb installer, but when booting from it, it fails with the following error messages:
Screenshot of USB Installer Boot Error Messages.
Screenshot of USB Installer Boot Error Messages.
I've tried using two different USB sticks, and burning the image with dd in a terminal window, Balena Etcher, Win32DiskImager, and Rufus. It always gives me the same result.

Re: 20.01 Fails on Booting from Install USB

Posted: Thu Feb 27, 2020 8:40 am
by ericbsd
How much ram you have on that machine?

Re: 20.01 Fails on Booting from Install USB

Posted: Thu Feb 27, 2020 10:38 am
by BSDaemon2020
It has 32GB (a pair of 16GB dimms).

(Edit: Here's the full specs:)

Ryzen 3900X
B450M-PRO-VDH-MAX
32GB (2x16GB) DDR4 3600 C18
Sapphire Pulse RX590 8GB
ADATA SX8200 Pro 1TB PCIe NVME

Re: 20.01 Fails on Booting from Install USB

Posted: Fri Feb 28, 2020 8:13 am
by Vermilion
Did you check your RAM with Memtest? Your usb drives were of same type/manufacturer? What about SecureBoot/UEFI options?