Trouble replacing TrueOS by 19.04

Questions about the installation of FreeBSD
Post Reply
ajr
Posts: 1
Joined: Sat May 25, 2019 5:03 am
Has thanked: 0
Been thanked: 0

Trouble replacing TrueOS by 19.04

Post by ajr » Sat May 25, 2019 6:43 am

Hi all,

This is my 1st post in GhostBSD.
I have a background with FreeeBSD as server OS but no experience with X-Windows or BSD desktops.

I have an outdated TrueOS installation on a dedicated SSD and want to replace it by a fresh GhostBSD 19.04.
After booting from the CD, I expected something like the BSD installer, but was faced with a lock order reversal crash. )-8
After a pause, it throws me in the X configuration Menu.

I attach a screenshot from the crash.

Any help appreciated,
Thanks, ajr

PS: I'm a mailinglist guy, quite unfamiliar with BBs. (-;
PPS: dmesg (from the TrueOS installation):

Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-CURRENT #26 fa797a5a3(trueos-stable-18.03): Mon Mar 26 00:24:47 UTC 2018
root@chimera:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
FreeBSD clang version 6.0.0 (branches/release_60 324090) (based on LLVM 6.0.0)
VT(vga): resolution 640x480
CPU: Intel(R) Core(TM) i5-6500 CPU @ 3.20GHz (3192.16-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x506e3 Family=0x6 Model=0x5e Stepping=3
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x121<LAHF,ABM,Prefetch>
Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE>
XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 17179869184 (16384 MB)
avail memory = 16480366592 (15716 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-119 on motherboard
SMP: AP CPU #3 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
Timecounter "TSC-low" frequency 1596079159 Hz quality 1000
random: entropy device external interface
netmap: loaded module
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff81031000, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
kbd1 at kbdmux0
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
aesni0: <AES-CBC,AES-XTS,AES-GCM,AES-ICM> on motherboard
acpi0: <ALASKA A M I > on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 24000000 Hz quality 950
Event timer "HPET" frequency 24000000 Hz quality 550
Event timer "HPET1" frequency 24000000 Hz quality 440
Event timer "HPET2" frequency 24000000 Hz quality 440
Event timer "HPET3" frequency 24000000 Hz quality 440
Event timer "HPET4" frequency 24000000 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xde000000-0xdeffffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
xhci0: <Intel Sunrise Point USB 3.0 controller> mem 0xdf110000-0xdf11ffff irq 16 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0: waiting for BIOS to give up control
xhci_interrupt: host controller halted
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
ahci0: <Intel Sunrise Point AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xdf128000-0xdf129fff,0xdf12d000-0xdf12d0ff,0xdf12c000-0xdf12c7ff irq 16 at device 23.0 on pci0
ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 29.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 19 at device 29.3 on pci0
pci2: <ACPI PCI bus> on pcib2
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xdf004000-0xdf004fff,0xdf000000-0xdf003fff irq 19 at device 0.0 on pci2
re0: Using 1 MSI-X message
re0: ASPM disabled
re0: Chip rev. 0x54000000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: 4c:cc:6a:af:b4:cd
re0: netmap queues/slots: TX 1/256, RX 1/256
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
pci0: <memory> at device 31.2 (no driver attached)
hdac0: <Intel Sunrise Point HDA Controller> mem 0xdf120000-0xdf123fff,0xdf100000-0xdf10ffff irq 16 at device 31.3 on pci0
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
ppc1: <Parallel port> port 0x378-0x37f irq 5 on acpi0
ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc1
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0
uart1: <16550 or compatible> at port 0x2f8 irq 3 on isa0
uart1: non-PNP ISA device will be removed from GENERIC in FreeBSD 12.
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: <Realtek ALC892 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC892 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa0
pcm1: <Realtek ALC892 (Front Analog)> at nid 27 and 25 on hdaa0
hdacc1: <Intel Skylake HDA CODEC> at cad 2 on hdac0
hdaa1: <Intel Skylake Audio Function Group> at nid 1 on hdacc1
pcm2: <Intel Skylake (HDMI/DP 8ch)> at nid 3 on hdaa1
ugen0.1: <0x8086 XHCI root HUB> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub0: 26 ports with 26 removable, self powered
ugen0.2: <vendor 0x046a product 0x0023> at usbus0
ukbd0 on uhub0
ukbd0: <vendor 0x046a product 0x0023, class 0/0, rev 2.00/2.20, addr 1> on usbus0
kbd2 at ukbd0
ugen0.3: <Logitech USB Optical Mouse> at usbus0
ses0 at ahciem0 bus 0 scbus6 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <Samsung SSD 850 EVO 500GB EMT02B6Q> ACS-2 ATA SATA 3.x device
ada0: Serial Number S2RBNB0HA18333X
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 476940MB (976773168 512 byte sectors)
ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN>
cd0 at ahcich1 bus 0 scbus1 target 0 lun 0
cd0: <HL-DT-ST DVD-RW GH61N PA03> Removable CD-ROM SCSI device
cd0: Serial Number K4RA8P82723
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt
Trying to mount root from zfs:tank/ROOT/12.0-CURRENT-up-20180409_154655 []...
re0: link state changed to UP
Cuse v0.1.35 @ /dev/cuse
acpi_video0: <ACPI video extension> on vgapci0
fuse-freebsd: version 0.4.4, FUSE ABI 7.8
ums0 on uhub0
ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/72.00, addr 2> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=0
GEOM_ELI: Device label/swap0.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI: Crypto: hardware
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled
re0: link state changed to DOWN
re0: link state changed to UP
uhid0 on uhub0
uhid0: <vendor 0x046a product 0x0023, class 0/0, rev 2.00/2.20, addr 1> on usbus0
[drm] Initialized
drmn0: <drmn> on vgapci0
vgapci0: child drmn0 requested pci_enable_io
vgapci0: child drmn0 requested pci_enable_io
[drm] Memory usable by graphics device = 4096M
Failed to add WC MTRR for [0xc0000000-0xcfffffff]: -22; performance may suffer
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] Connector eDP-1: get mode from tunables:
[drm] - kern.vt.fb.modes.eDP-1
[drm] - kern.vt.fb.default_mode
i915/skl_dmc_ver1_26.bin: could not load firmware image, error 2
[drm] failed to retrieve link info, disabling eDP
[drm] Connector DP-1: get mode from tunables:
[drm] - kern.vt.fb.modes.DP-1
[drm] - kern.vt.fb.default_mode
[drm] Connector HDMI-A-1: get mode from tunables:
[drm] - kern.vt.fb.modes.HDMI-A-1
[drm] - kern.vt.fb.default_mode
[drm] Connector HDMI-A-2: get mode from tunables:
[drm] - kern.vt.fb.modes.HDMI-A-2
[drm] - kern.vt.fb.default_mode
[drm] Connector DP-2: get mode from tunables:
[drm] - kern.vt.fb.modes.DP-2
[drm] - kern.vt.fb.default_mode
[drm] Connector HDMI-A-3: get mode from tunables:
[drm] - kern.vt.fb.modes.HDMI-A-3
[drm] - kern.vt.fb.default_mode
[drm] GuC firmware load skipped
[drm] Initialized i915 1.6.0 20160919 for drmn on minor 0
VT: Replacing driver "vga" with new "fb".
start FB_INFO:
type=11 height=1440 width=2560 depth=32
cmsize=16 size=14745600
pbase=0xc00c0000 vbase=0xfffff800c00c0000
name=drmn0 flags=0x0 stride=10240 bpp=32
cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000
end FB_INFO
drmn0: fb0: inteldrmfb frame buffer device
i915/skl_dmc_ver1_26.bin: could not load firmware image, error 2
[drm] Finished loading i915/skl_dmc_ver1_26.bin (v1.26)
[drm] RC6 on
Attachments
IMG_4680.jpg
screenshot of crash

Post Reply