The card wireless PCI BCM4313 is not compatible with Ghost?

Need support for GhostBSD. Ask here if your question does not fit elsewhere.
Post Reply
ernbsd
Posts: 11
Joined: Mon Aug 14, 2017 2:30 pm
Has thanked: 0
Been thanked: 0

The card wireless PCI BCM4313 is not compatible with Ghost?

Post by ernbsd » Mon Aug 14, 2017 3:50 pm

Hello community of GhostBSD, I am new here and with many eager to learn.



The card wireless PCI Broadcom BCM4313 is not compatible with the derived systems of BSD, and I'm trying to supplement with an alternative. That card wireless PCI which can be compatible with BCM4313 Broadcom? Previously I did purchase in the store a device-driver USB wireless TP-LINK model No. TL-WN823N and it seems that is not compatible with GhostBSD, some help please?

# uname -a

Code: Select all

FreeBSD xxx.freebsd-pc.home 11.0-RELEASE-p12 FreeBSD 11.0-RELEASE-p12 #0: Wed Aug  9 10:03:39 UTC 2017     root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC  amd64
I put the /boot/loader.conf file and does not give a result, it does not show the device of UBS wireless:


# ee /boot/loader.conf
wlan_wep_load="YES"
wlan_ccmp_load="YES"
wlan_tkip_load="YES"
if_urtwn_load="YES"
urtwn-rtl8192cfwU_load="YES"
legal.realtek.license_ack=1

snd_hda_load="YES"
snd_driver_load="YES"
Then reboot the system and gave problems in the beginning, I checked with the command and gave no result.


# dmesg | grep urtwn

Code: Select all

#
# kldstat
I

Code: Select all

d Refs Address            Size     Name
 1   60 0xffffffff80200000 1fa88f8  kernel
 2    1 0xffffffff82221000 a9f1     linprocfs.ko
 3    3 0xffffffff8222c000 7b08     linux_common.ko
 4    1 0xffffffff82234000 fb66     geom_mirror.ko
 5    1 0xffffffff82244000 fc58     geom_journal.ko
 6    1 0xffffffff82254000 10582    geom_eli.ko
 7    1 0xffffffff82265000 3de40    linux.ko
 8    1 0xffffffff822a3000 e567     fuse.ko
 9    1 0xffffffff822b2000 155b2    ext2fs.ko
10    1 0xffffffff822c8000 849e     cuse.ko
11    1 0xffffffff822d1000 3710     ums.ko
12    1 0xffffffff822d5000 389f4    linux64.ko
13    1 0xffffffff8230e000 ea37     iscsi.ko
14    1 0xffffffff8231d000 978bd    i915kms.ko
15    1 0xffffffff823b5000 55180    drm2.ko
16    4 0xffffffff8240b000 26e8     iicbus.ko
17    1 0xffffffff8240e000 1c75     iic.ko
18    1 0xffffffff82410000 1e70     iicbb.ko
#
# pciconf -lvcb

Code: Select all

hostb0@pci0:0:0:0:	class=0x060000 card=0x1439103c chip=0x00448086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Core Processor DRAM Controller'
    class      = bridge
    subclass   = HOST-PCI
    cap 09[e0] = vendor (length 12) Intel cap 0 version 1
vgapci0@pci0:0:2:0:	class=0x030000 card=0x1439103c chip=0x00468086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Core Processor Integrated Graphics Controller'
    class      = display
    subclass   = VGA
    bar   [10] = type Memory, range 64, base 0xb0000000, size 4194304, enabled
    bar   [18] = type Prefetchable Memory, range 64, base 0xa0000000, size 268435456, enabled
    bar   [20] = type I/O Port, range 32, base 0x3050, size 8, enabled
    cap 05[90] = MSI supports 1 message enabled with 1 message
    cap 01[d0] = powerspec 2  supports D0 D3  current D0
    cap 13[a4] = PCI Advanced Features: FLR TP
none0@pci0:0:22:0:	class=0x078000 card=0x1439103c chip=0x3b648086 rev=0x06 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '5 Series/3400 Series Chipset HECI Controller'
    class      = simple comms
    bar   [10] = type Memory, range 64, base 0xb4404000, size 16, enabled
    cap 01[50] = powerspec 3  supports D0 D3  current D0
    cap 05[8c] = MSI supports 1 message, 64 bit 
ehci0@pci0:0:26:0:	class=0x0c0320 card=0x1439103c chip=0x3b3c8086 rev=0x05 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '5 Series/3400 Series Chipset USB2 Enhanced Host Controller'
    class      = serial bus
    subclass   = USB
    bar   [10] = type Memory, range 32, base 0xb440a000, size 1024, enabled
    cap 01[50] = powerspec 2  supports D0 D3  current D0
    cap 0a[58] = EHCI Debug Port at offset 0xa0 in map 0x14
    cap 13[98] = PCI Advanced Features: FLR TP
hdac0@pci0:0:27:0:	class=0x040300 card=0x1439103c chip=0x3b568086 rev=0x05 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '5 Series/3400 Series Chipset High Definition Audio'
    class      = multimedia
    subclass   = HDA
    bar   [10] = type Memory, range 64, base 0xb4400000, size 16384, enabled
    cap 01[50] = powerspec 2  supports D0 D3  current D0
    cap 05[60] = MSI supports 1 message, 64 bit enabled with 1 message
    cap 10[70] = PCI-Express 1 root endpoint max data 128(128) FLR NS
    ecap 0002[100] = VC 1 max VC1
    ecap 0005[130] = Root Complex Link Declaration 1
pcib1@pci0:0:28:0:	class=0x060400 card=0x1439103c chip=0x3b428086 rev=0x05 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '5 Series/3400 Series Chipset PCI Express Root Port 1'
    class      = bridge
    subclass   = PCI-PCI
    cap 10[40] = PCI-Express 2 root port max data 128(128)
                 link x1(x1) speed 2.5(2.5) ASPM L0s/L1(L0s/L1)
                 slot 0 power limit 100 mW HotPlug(present) surprise
    cap 05[80] = MSI supports 1 message enabled with 1 message
    cap 0d[90] = PCI Bridge card=0x1439103c
    cap 01[a0] = powerspec 2  supports D0 D3  current D0
pcib2@pci0:0:28:2:	class=0x060400 card=0x1439103c chip=0x3b468086 rev=0x05 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '5 Series/3400 Series Chipset PCI Express Root Port 3'
    class      = bridge
    subclass   = PCI-PCI
    cap 10[40] = PCI-Express 2 root port max data 128(128)
                 link x1(x1) speed 2.5(2.5) ASPM L0s/L1(L0s/L1)
                 slot 2 power limit 100 mW HotPlug(present) surprise
    cap 05[80] = MSI supports 1 message enabled with 1 message
    cap 0d[90] = PCI Bridge card=0x1439103c
    cap 01[a0] = powerspec 2  supports D0 D3  current D0
ehci1@pci0:0:29:0:	class=0x0c0320 card=0x1439103c chip=0x3b348086 rev=0x05 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '5 Series/3400 Series Chipset USB2 Enhanced Host Controller'
    class      = serial bus
    subclass   = USB
    bar   [10] = type Memory, range 32, base 0xb4409000, size 1024, enabled
    cap 01[50] = powerspec 2  supports D0 D3  current D0
    cap 0a[58] = EHCI Debug Port at offset 0xa0 in map 0x14
    cap 13[98] = PCI Advanced Features: FLR TP
pcib3@pci0:0:30:0:	class=0x060401 card=0x1439103c chip=0x24488086 rev=0xa5 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801 Mobile PCI Bridge'
    class      = bridge
    subclass   = PCI-PCI
    cap 0d[50] = PCI Bridge card=0x1439103c
isab0@pci0:0:31:0:	class=0x060100 card=0x1439103c chip=0x3b098086 rev=0x05 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'HM55 Chipset LPC Interface Controller'
    class      = bridge
    subclass   = PCI-ISA
    cap 09[e0] = vendor (length 16) Intel cap 1 version 1
ahci0@pci0:0:31:2:	class=0x010601 card=0x1439103c chip=0x3b298086 rev=0x05 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '5 Series/3400 Series Chipset 4 port SATA AHCI Controller'
    class      = mass storage
    subclass   = SATA
    bar   [10] = type I/O Port, range 32, base 0x3048, size 8, enabled
    bar   [14] = type I/O Port, range 32, base 0x305c, size 4, enabled
    bar   [18] = type I/O Port, range 32, base 0x3040, size 8, enabled
    bar   [1c] = type I/O Port, range 32, base 0x3058, size 4, enabled
    bar   [20] = type I/O Port, range 32, base 0x3020, size 32, enabled
    bar   [24] = type Memory, range 32, base 0xb4408000, size 2048, enabled
    cap 05[80] = MSI supports 1 message enabled with 1 message
    cap 01[70] = powerspec 3  supports D0 D3  current D0
    cap 12[a8] = SATA Index-Data Pair
    cap 13[b0] = PCI Advanced Features: FLR TP
none1@pci0:0:31:3:	class=0x0c0500 card=0x1439103c chip=0x3b308086 rev=0x05 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '5 Series/3400 Series Chipset SMBus Controller'
    class      = serial bus
    subclass   = SMBus
    bar   [10] = type Memory, range 64, base 0xb4406000, size 256, enabled
    bar   [20] = type I/O Port, range 32, base 0x3000, size 32, enabled
none2@pci0:0:31:6:	class=0x118000 card=0x1439103c chip=0x3b328086 rev=0x05 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '5 Series/3400 Series Chipset Thermal Subsystem'
    class      = dasp
    bar   [10] = type Memory, range 64, base 0xb4407000, size 4096, enabled
    cap 01[50] = powerspec 3  supports D0 D3  current D0
    cap 05[80] = MSI supports 1 message 
re0@pci0:2:0:0:	class=0x020000 card=0x1439103c chip=0x813610ec rev=0x02 hdr=0x00
    vendor     = 'Realtek Semiconductor Co., Ltd.'
    device     = 'RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller'
    class      = network
    subclass   = ethernet
    bar   [10] = type I/O Port, range 32, base 0x2000, size 256, enabled
    bar   [18] = type Prefetchable Memory, range 64, base 0xb3400000, size 4096, enabled
    bar   [20] = type Prefetchable Memory, range 64, base 0xb3410000, size 65536, enabled
    cap 01[40] = powerspec 3  supports D0 D1 D2 D3  current D0
    cap 05[50] = MSI supports 1 message, 64 bit 
    cap 10[70] = PCI-Express 2 endpoint MSI 1 max data 128(128) RO
                 link x1(x1) speed 2.5(2.5) ASPM disabled(L0s/L1)
    cap 11[ac] = MSI-X supports 2 messages, enabled
                 Table in map 0x20[0x0], PBA in map 0x20[0x800]
    cap 03[cc] = VPD
    ecap 0001[100] = AER 1 0 fatal 0 non-fatal 2 corrected
    ecap 0002[140] = VC 1 max VC0
    ecap 0003[160] = Serial 1 0100000000000000
none3@pci0:3:0:0:	class=0x028000 card=0x145c103c chip=0x472714e4 rev=0x01 hdr=0x00
    vendor     = 'Broadcom Limited'
    device     = 'BCM4313 802.11bgn Wireless Network Adapter'
    class      = network
    bar   [10] = type Memory, range 64, base 0xb2400000, size 16384, enabled
    cap 01[40] = powerspec 3  supports D0 D1 D2 D3  current D0
    cap 09[58] = vendor (length 120)
    cap 05[48] = MSI supports 1 message, 64 bit 
    cap 10[d0] = PCI-Express 1 endpoint max data 128(128)
                 link x1(x1) speed 2.5(2.5) ASPM L0s/L1(L0s/L1)
    ecap 0001[100] = AER 1 0 fatal 0 non-fatal 1 corrected
    ecap 0002[13c] = VC 1 max VC0
    ecap 0003[160] = Serial 1 00004cffff235cac
    ecap 0004[16c] = Power Budgeting 1
hostb1@pci0:127:0:0:	class=0x060000 card=0x1439103c chip=0x2c628086 rev=0x05 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Core Processor QuickPath Architecture Generic Non-core Registers'
    class      = bridge
    subclass   = HOST-PCI
hostb2@pci0:127:0:1:	class=0x060000 card=0x1439103c chip=0x2d018086 rev=0x05 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Core Processor QuickPath Architecture System Address Decoder'
    class      = bridge
    subclass   = HOST-PCI
hostb3@pci0:127:2:0:	class=0x060000 card=0x1439103c chip=0x2d108086 rev=0x05 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Core Processor QPI Link 0'
    class      = bridge
    subclass   = HOST-PCI
hostb4@pci0:127:2:1:	class=0x060000 card=0x1439103c chip=0x2d118086 rev=0x05 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '1st Generation Core i3/5/7 Processor QPI Physical 0'
    class      = bridge
    subclass   = HOST-PCI
hostb5@pci0:127:2:2:	class=0x060000 card=0x1439103c chip=0x2d128086 rev=0x05 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '1st Generation Core i3/5/7 Processor Reserved'
    class      = bridge
    subclass   = HOST-PCI
hostb6@pci0:127:2:3:	class=0x060000 card=0x1439103c chip=0x2d138086 rev=0x05 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '1st Generation Core i3/5/7 Processor Reserved'
    class      = bridge
    subclass   = HOST-PCI
 # 
# ifconfig

Code: Select all

re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
	ether 90:fb:a6:b0:71:af
	inet 19X.XXX.X.XX netmask 0xffffff00 broadcast 192.168.0.255 
	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
	media: Ethernet autoselect (100baseTX <full-duplex>)
	status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
	options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
	inet6 ::1 prefixlen 128 
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2 
	inet 127.0.0.1 netmask 0xff000000 
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
	groups: lo 
 # 



NevilleGoddard
Developer
Posts: 478
Joined: Thu Dec 22, 2016 10:30 pm
Location: Japan
Has thanked: 9 times
Been thanked: 10 times

Re: The card wireless PCI BCM4313 is not compatible with Gho

Post by NevilleGoddard » Wed Aug 16, 2017 10:17 am

The TP-LINK device should work.

Are you using grub or the FreeBSD bootloader?

If you're using grub to boot, your boot/loader.conf edits may not work. Try editing /etc/rc.conf instead.

This is my kld_list section:

# Load the following kernel modules
kld_list="snd_envy24ht nvidia-modeset geom_mirror geom_journal geom_eli linux fuse ext2fs cuse"

Make yours look something like this:

# Load the following kernel modules
kld_list=" wlan_wep wlan_ccmp wlan_tkip if_urtwn urtwn-rtl8192cfwU legal.realtek.license_ack=1 geom_mirror geom_journal geom_eli linux fuse ext2fs cuse"

If you are using the FreeBSD loader, give the whole output of /boot/loader.conf because I noticed you have the sound drivers in loader.conf but the kernel modules are not in kldstat.

Post Reply