NETWORK no card/interface found

Need support for GhostBSD. Ask here if your question does not fit elsewhere.
Post Reply
chris35
Posts: 18
Joined: Mon Aug 28, 2017 12:16 am

NETWORK no card/interface found

Post by chris35 »

hi ! Many thanks first for the job, i can't wait to test this version of BSD which looks perfect!
I was able to install the latest version, stable 13 without any problem, but I cannot configure my ethernet network ... I followed the tutorial but when I do an ifconfig -a I only have Lo0, nothing other, my bios is however well regulated in UEFI, my card network too.

pq. sorry for my bad english i'm french...
chris35
Posts: 18
Joined: Mon Aug 28, 2017 12:16 am

Re: NETWORK no card/interface found

Post by chris35 »

to add some informations of my config, its a intel card on gigabyte z490 mb
Attachments
202519253_886960795191931_8608078806936417169_n.jpg
202617411_3009885309285326_3215358308033355387_n.jpg
chris35
Posts: 18
Joined: Mon Aug 28, 2017 12:16 am

Re: NETWORK no card/interface found

Post by chris35 »

OK... Ethernet controller: Intel Corporation Ethernet Controller I225-V doesn't be support by BSD :(
chris35
Posts: 18
Joined: Mon Aug 28, 2017 12:16 am

Re: NETWORK no card/interface found

Post by chris35 »

chris35
Posts: 18
Joined: Mon Aug 28, 2017 12:16 am

Re: NETWORK no card/interface found

Post by chris35 »

User avatar
ericbsd
Developer
Posts: 2052
Joined: Mon Nov 19, 2012 7:54 pm

Re: NETWORK no card/interface found

Post by ericbsd »

If the GhostBSD card does not appear in ifconfig after boot it is most likely not supported.
chris35
Posts: 18
Joined: Mon Aug 28, 2017 12:16 am

Re: NETWORK no card/interface found

Post by chris35 »

HI Eric, yes, FreeBSD will integrate this new Intel card in his next RELEASE
take a look https://forums.freebsd.org/threads/inte ... yet.80991/
User avatar
ericbsd
Developer
Posts: 2052
Joined: Mon Nov 19, 2012 7:54 pm

Re: NETWORK no card/interface found

Post by ericbsd »

Since GhostBSD follows stable and not release, it will get in when it gets merged into the 13.0-STABLE repo.
chris35
Posts: 18
Joined: Mon Aug 28, 2017 12:16 am

Re: NETWORK no card/interface found

Post by chris35 »

yep, in few weeks or months...
chris35
Posts: 18
Joined: Mon Aug 28, 2017 12:16 am

Re: NETWORK no card/interface found

Post by chris35 »

Perhaps Eric you could explain how to implement this driver right now ?
a guy on FreeBSB forum told me : and are willing to build system components from source (kernel or kernel module) you can have the driver right now.
The linked revision comes with a patch which can be applied to the system source to build the igc(4) driver. I've tested the patch, kernel or kernel module alone builds fine on 13.0-RELEASE, but I can't test the functionality, no hardware. Try the kernel module.
the patch is here but how using it ? https://reviews.freebsd.org/file/data/d ... 30668.diff
Post Reply