Lost Wifi Driver on Update from 25 -> 26

Verbatim

wifi-driver2.png

After updating from GhostBSD 25 -> 26, lost wifi. Any suggestions? I don't have a spare network adapter, so if additional files are needed, can they be transferred via flash drive? A backup was made of the previous state (before backup) ? Should I revert to that and do some additional prep?

loader.conf:

`
rc_system="bsdrc"
crypto_load="YES"
aesni_load="YES"
geom_eli_load="YES"
zfs_load="YES"
kern.racct.enable=1
iwm9000fw_load="YES"
#devmatch_blocklist="if_iwm"
#hw.psm.elantech_support=0
#debug.psm.loglevel="2"
#hw.psm.synaptics_support="1"
#hint.psm.0.flags="0x1000"

pciconf:

`
none3@pci0:0:20:3: class=0x028000 rev=0x30 hdr=0x00 vendor=0x8086 device=0x9df0 subvendor=0x8086 subdevice=0x0030
vendor = 'Intel Corporation'
device = 'Cannon Point-LP CNVi [Wireless-AC]'
class = network

none4@pci0:0:22:0: class=0x078000 rev=0x30 hdr=0x00 vendor=0x8086 device=0x9de0 subvendor=0x17aa subdevice=0x2286

em0@pci0:0:31:6: class=0x020000 rev=0x30 hdr=0x00 vendor=0x8086 device=0x15bd subvendor=0x17aa subdevice=0x2286
vendor = 'Intel Corporation'
device = 'Ethernet Connection (6) I219-LM'
class = network
subclass = ethernet

rc.conf

`
zfs_enable="YES"
kld_list="linux linux64 cuse fusefs hgame /boot/modules/i915kms.ko nullfs"
linux_enable="YES"
ntpd_enable="YES"
ntpd_sync_on_start="YES"
devfs_enable="YES"
devfs_system_ruleset="devfsrules_common"
dbus_enable="YES"
lightdm_enable="YES"
webcamd_enable="YES"
cupsd_enable="YES"
avahi_daemon_enable="YES"
avahi_dnsconfd_enable="YES"
moused_enable="YES"
ipfw_enable="YES"
firewall_enable="YES"
ifconfig_em0="DHCP"
wlans_iwm0="wlan0"
#devmatch_enable="YES"
#kld_list="${kld_list} if_iwlwifi"
ifconfig_wlan0="WPA DHCP"
keymap="us.kbd"
hostname="daniel-ghostbsd"
openvpn_enable="YES"

ifconfig_ovpn0="DHCP"

dmesg:

---<<BOOT>>--- Copyright (c) 1992-2025 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 15.0-RELEASE-p10 n230761-3152dd282d6e GENERIC amd64 FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2) VT(efifb): resolution 1920x1080 CPU: Intel(R) Core(TM) i7-8665U CPU @ 1.90GHz (2100.00-MHz K8-class CPU) Origin="GenuineIntel" Id=0x806ec Family=0x6 Model=0x8e Stepping=12 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x121<LAHF,ABM,Prefetch> Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> Structured Extended Features3=0xbc000e00<MCUOPT,MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> IA32_ARCH_CAPS=0xa0a0cab<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO,TSX_CTRL> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 17179869184 (16384 MB) avail memory = 16448159744 (15686 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <LENOVO TP-N2J > FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads random: registering fast source Intel Secure Key Seed random: fast provider: "Intel Secure Key Seed" random: unblocking device. ioapic0 <Version 2.0> irqs 0-119 Launching APs: 1 6 4 3 2 5 7 random: entropy device external interface kbd1 at kbdmux0 efirtc0: <EFI Realtime Clock> efirtc0: registered as a time-of-day clock, resolution 1.000000s smbios0: <System Management BIOS> at iomem 0x98548000-0x98548017 smbios0: Entry point: v3 (64-bit), Version: 3.1 aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> acpi0: <LENOVO TP-N2J> Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0.RP07.BRST], AE_ALREADY_EXISTS (20250807/dswload2-480) ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20250807/psobject-372) Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0.RP07.RSTX], AE_ALREADY_EXISTS (20250807/dswload2-480) ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20250807/psobject-372) Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0.RP07.RSTG], AE_ALREADY_EXISTS (20250807/dswload2-480) ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20250807/psobject-372) Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0.RP07.PXSX.L850], AE_ALREADY_EXISTS (20250807/dswload2-480) ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20250807/psobject-372) Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0.RP07.PXSX._RST], AE_ALREADY_EXISTS (20250807/dswload2-480) ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20250807/psobject-372) acpi_ec0: <Embedded Controller: GPE 0x16, ECDT> port 0x62,0x66 on acpi0 acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 24000000 Hz quality 950 Event timer "HPET" frequency 24000000 Hz quality 550 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0xb0000000-0xb0ffffff,0xa0000000-0xafffffff at device 2.0 on pci0 vgapci0: Boot video device xhci0: <XHCI (generic) USB 3.0 controller> mem 0xb3d20000-0xb3d2ffff at device 20.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA xhci0: xECP capabilities <PROTO,PROTO,VEND(c0),LEGACY,VEND(c6),VEND(c7),VEND(c2),DEBUG,VEND(c3),VEND(c4),VEND(c5),VEND(c8),VEND(c9),VEND(ca),VEND(cb)> usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 pci0: <memory, RAM> at device 20.2 (no driver attached) pci0: <network> at device 20.3 (no driver attached) pci0: <simple comms> at device 22.0 (no driver attached) pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pci1: <unknown> at device 0.0 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 28.4 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci2 pci3: <ACPI PCI bus> on pcib3 pcib4: <PCI-PCI bridge> at device 0.0 on pci3 pci4: <PCI bus> on pcib4 pcib5: <PCI-PCI bridge> at device 1.0 on pci3 pcib6: <ACPI PCI-PCI bridge> at device 2.0 on pci3 pci5: <ACPI PCI bus> on pcib6 xhci1: <Intel Alpine Ridge Thunderbolt 3 USB controller> mem 0xb3a00000-0xb3a0ffff at device 0.0 on pci5 xhci1: 32 bytes context size, 64-bit DMA xhci1: xECP capabilities <PROTO,VEND(c0),LEGACY,VEND(c6),VEND(c7),VEND(c2),DEBUG,VEND(c3),VEND(c4),VEND(c5),VEND(c8),VEND(c9),PROTO,VEND(ca)> usbus1 on xhci1 usbus1: 5.0Gbps Super Speed USB v3.0 pcib7: <ACPI PCI-PCI bridge> at device 29.0 on pci0 pcib8: <ACPI PCI-PCI bridge> at device 29.4 on pci0 pci6: <ACPI PCI bus> on pcib8 nvme0: <Generic NVMe Device> mem 0xb2500000-0xb2503fff,0xb2505000-0xb2505fff,0xb2504000-0xb2504fff at device 0.0 on pci6 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 hdac0: <Intel Cannon Lake HDA Controller> mem 0xb3d3c000-0xb3d3ffff,0xb2400000-0xb24fffff at device 31.3 on pci0 pci0: <serial bus> at device 31.5 (no driver attached) em0: <Intel(R) I219-LM CNP(6)> mem 0xb3d00000-0xb3d1ffff at device 31.6 on pci0 em0: EEPROM V0.4-3 em0: Using 1024 TX descriptors and 1024 RX descriptors em0: Using an MSI interrupt em0: Ethernet address: f8:75:a4:c6:4b:8a em0: netmap queues/slots: TX 1/1024, RX 1/1024 acpi_button0: <Sleep Button> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 16.0. psm0: model Elantech Touchpad, device ID 0 acpi_syscontainer0: <System Container> on acpi0 acpi_acad0: <AC Adapter> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 hwpstate_intel0: <Intel Speed Shift> on cpu0 cpufreq0: <CPU frequency control> on cpu0 hwpstate_intel1: <Intel Speed Shift> on cpu1 cpufreq1: <CPU frequency control> on cpu1 hwpstate_intel2: <Intel Speed Shift> on cpu2 cpufreq2: <CPU frequency control> on cpu2 hwpstate_intel3: <Intel Speed Shift> on cpu3 cpufreq3: <CPU frequency control> on cpu3 hwpstate_intel4: <Intel Speed Shift> on cpu4 cpufreq4: <CPU frequency control> on cpu4 hwpstate_intel5: <Intel Speed Shift> on cpu5 cpufreq5: <CPU frequency control> on cpu5 hwpstate_intel6: <Intel Speed Shift> on cpu6 cpufreq6: <CPU frequency control> on cpu6 hwpstate_intel7: <Intel Speed Shift> on cpu7 cpufreq7: <CPU frequency control> on cpu7 Timecounter "TSC" frequency 2112019588 Hz quality 1000 Timecounters tick every 1.000 msec ZFS filesystem version: 5 ZFS storage pool version: features support (5000) ugen1.1: <Intel XHCI root HUB> at usbus1 uhub0 on usbus1 uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 ugen0.1: <Intel XHCI root HUB> at usbus0 uhub1 on usbus0 uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 hdacc0: <Realtek ALC257 HDA CODEC> at cad 0 on hdac0 hdaa0: <Realtek ALC257 Audio Function Group> at nid 1 on hdacc0 pcm0: <Realtek ALC257 (Analog 2.0+HP/2.0)> at nid 20,33 and 18 on hdaa0 pcm1: <Realtek ALC257 (Right Analog Mic)> at nid 25 on hdaa0 hdacc1: <Intel Kaby Lake HDA CODEC> at cad 2 on hdac0 hdaa1: <Intel Kaby Lake Audio Function Group> at nid 1 on hdacc1 pcm2: <Intel Kaby Lake (HDMI/DP 8ch)> at nid 3 on hdaa1 nda0 at nvme0 bus 0 scbus0 target 0 lun 1 nda0: <SKHynix_HFS256GD9TNG-L5B0B 80750C10 ND02N6966104Y2S2V> nda0: Serial Number ND02N6966104Y2S2V nda0: nvme version 1.3 nda0: 244198MB (500118192 512 byte sectors) Trying to mount root from zfs:zroot/ROOT/26.1-R15.0p10-2026-07-08_081519 []... uhub0: 4 ports with 4 removable, self powered Cuse v0.1.37 @ /dev/cuse uhub1: 18 ports with 18 removable, self powered [drm] Got Intel graphics stolen memory base 0x9d800000, size 0x2000000 drmn0: <drmn> on vgapci0 vgapci0: child drmn0 requested pci_enable_io vgapci0: child drmn0 requested pci_enable_io i915/kbl_dmc_ver1_04.bin: could not load binary firmware /boot/firmware/i915/kbl_dmc_ver1_04.bin either kbl_dmc_ver1_04.bin: could not load binary firmware /boot/firmware/kbl_dmc_ver1_04.bin either i915_kbl_dmc_ver1_04.bin: could not load binary firmware /boot/firmware/i915_kbl_dmc_ver1_04.bin either lkpi_iic0: <LinuxKPI I2C> on drmn0 iicbus0: <Philips I2C bus> on lkpi_iic0 iic0: <I2C generic I/O> on iicbus0 lkpi_iic1: <LinuxKPI I2C> on drmn0 iicbus1: <Philips I2C bus> on lkpi_iic1 iic1: <I2C generic I/O> on iicbus1 lkpi_iic2: <LinuxKPI I2C> on drmn0 iicbus2: <Philips I2C bus> on lkpi_iic2 iic2: <I2C generic I/O> on iicbus2 lkpi_iic3: <LinuxKPI I2C> on drmn0 iicbus3: <Philips I2C bus> on lkpi_iic3 iic3: <I2C generic I/O> on iicbus3 drmn0: successfully loaded firmware image 'i915/kbl_dmc_ver1_04.bin' drmn0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) drmn0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it drmn0: [drm] [ENCODER:117:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it sysctl_add_oid: can't re-use a leaf (hw.dri.debug)! lkpi_iic4: <LinuxKPI I2C> on drm1 iicbus4: <Philips I2C bus> on lkpi_iic4 iic4: <I2C generic I/O> on iicbus4 lkpi_iic5: <LinuxKPI I2C> on drm2 iicbus5: <Philips I2C bus> on lkpi_iic5 iic5: <I2C generic I/O> on iicbus5 lkpi_iic6: <LinuxKPI I2C> on drm4 iicbus6: <Philips I2C bus> on lkpi_iic6 iic6: <I2C generic I/O> on iicbus6 [drm] Initialized i915 1.6.0 20201103 for drmn0 on minor 0 VT: Replacing driver "efifb" with new "drmfb". start FB_INFO: height=1080 width=1920 depth=32 pbase=0xa0000000 vbase=0xfffff800a0000000 name=drmn0 id=i915drmfb flags=0x0 stride=7680 end FB_INFO pchtherm0: <CannonLake-LP Thermal Subsystem> mem 0xb3d43000-0xb3d43fff at device 18.0 on pci0 iwm0: <Intel(R) Dual Band Wireless AC 9560> mem 0xb3d38000-0xb3d3bfff at device 20.3 on pci0 iwm9000fw: could not load firmware image, error 2 iwm0: could not read firmware iwm9000fw (error 0) device_attach: iwm0 attach returned 6 rtsx0: <2.1g Realtek RTS522A PCIe SD Card Reader> mem 0xb3c00000-0xb3c00fff at device 0.0 on pci1 rtsx0: A card is detected mmc0: <MMC/SD bus> on rtsx0 ugen0.2: <ELAN Touchscreen> at usbus0 usbhid0 on uhub1 usbhid0: <ELAN Touchscreen, class 0/0, rev 2.00/59.11, addr 1> on usbus0 hidbus0: <HID bus> on usbhid0 ugen0.3: <Azurewave Integrated Camera> at usbus0 rtsx0: Controller timeout for CMD8 ugen0.4: <vendor 0x8087 product 0x0aaa> at usbus0 rtsx0: Controller timeout for CMD8 rtsx0: Controller timeout for CMD8 rtsx0: Controller timeout for CMD8 rtsx0: Controller timeout for CMD55 rtsx0: Controller timeout for CMD55 rtsx0: Controller timeout for CMD55 rtsx0: Controller timeout for CMD55 rtsx0: Controller timeout for CMD1 rtsx0: Controller timeout for CMD1 rtsx0: Controller timeout for CMD1 rtsx0: Controller timeout for CMD1 mmc0: No compatible cards found on bus iwm0: <Intel(R) Dual Band Wireless AC 9560> mem 0xb3d38000-0xb3d3bfff at device 20.3 on pci0 iwm9000fw: could not load firmware image, error 2 iwm0: could not read firmware iwm9000fw (error 0) device_attach: iwm0 attach returned 6 iwm0: <Intel(R) Dual Band Wireless AC 9560> mem 0xb3d38000-0xb3d3bfff at device 20.3 on pci0 iwm9000fw: could not load firmware image, error 2 iwm0: could not read firmware iwm9000fw (error 0) device_attach: iwm0 attach returned 6 iwm0: <Intel(R) Dual Band Wireless AC 9560> mem 0xb3d38000-0xb3d3bfff at device 20.3 on pci0 iwm9000fw: could not load firmware image, error 2 iwm0: could not read firmware iwm9000fw (error 0) device_attach: iwm0 attach returned 6 iwm0: <Intel(R) Dual Band Wireless AC 9560> mem 0xb3d38000-0xb3d3bfff at device 20.3 on pci0 iwm9000fw: could not load firmware image, error 2 iwm0: could not read firmware iwm9000fw (error 0) device_attach: iwm0 attach returned 6 acpi_wmi0: <ACPI-WMI mapping> on acpi0 acpi_wmi1: <ACPI-WMI mapping> on acpi0 acpi_wmi1: Embedded MOF found acpi_wmi2: <ACPI-WMI mapping> on acpi0 acpi_wmi2: Embedded MOF found acpi_wmi3: <ACPI-WMI mapping> on acpi0 acpi_wmi3: Embedded MOF found acpi_wmi4: <ACPI-WMI mapping> on acpi0 acpi_wmi4: Embedded MOF found acpi_wmi5: <ACPI-WMI mapping> on acpi0 acpi_wmi5: Embedded MOF found acpi_wmi6: <ACPI-WMI mapping> on acpi0 acpi_wmi6: Embedded MOF found lo0: link state changed to UP hmt0: <ELAN Touchscreen> on hidbus0 hmt0: Multitouch touchscreen with 0 external buttons hmt0: 10 contacts with [WH] properties. Report range [0:0] - [3312:1872] ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled pid 3032 (syslogd), jid 0, uid 0: exited on signal 11 (core dumped) hdac0: Command 0x20220011 timeout on address 2 hdac0: Command 0x20270d01 timeout on address 2 hdac0: Command 0x20270620 timeout on address 2 hdac0: Command 0x20272d01 timeout on address 2 hdac0: Command 0x20373400 timeout on address 2 hdac0: Command 0x20373411 timeout on address 2 hdac0: Command 0x203734f2 timeout on address 2 hdac0: Command 0x203734f3 timeout on address 2 hdac0: Command 0x203734f4 timeout on address 2 hdac0: Command 0x203734f5 timeout on address 2 hdac0: Command 0x203734f6 timeout on address 2 hdac0: Command 0x203734f7 timeout on address 2 hdac0: Command 0x20370740 timeout on address 2 hdac0: Command 0x20373000 timeout on address 2 hdac0: Command 0x20373200 timeout on address 2 hdac0: Command 0x20373000 timeout on address 2 hdac0: Command 0x20373100 timeout on address 2 hdac0: Command 0x20373100 timeout on address 2 hdac0: Command 0x20373100 timeout on address 2 hdac0: Command 0x20373100 timeout on address 2 hdac0: Command 0x20373100 timeout on address 2 hdac0: Command 0x20373100 timeout on address 2 hdac0: Command 0x20373100 timeout on address 2 hdac0: Command 0x20373100 timeout on address 2 hdac0: Command 0x20373100 timeout on address 2 hdac0: Command 0x20373100 timeout on address 2 hdac0: Command 0x20373100 timeout on address 2 hdac0: Command 0x20373100 timeout on address 2 hdac0: Command 0x20373100 timeout on address 2 hdac0: Command 0x20373100 timeout on address 2 hdac0: Command 0x20373100 timeout on address 2 hdac0: Command 0x20373100 timeout on address 2 hdac0: Command 0x20373100 timeout on address 2 hdac0: Command 0x20373100 timeout on address 2 hdac0: Command 0x20373100 timeout on address 2 hdac0: Command 0x20373100 timeout on address 2 hdac0: Command 0x20373100 timeout on address 2 hdac0: Command 0x20373100 timeout on address 2 hdac0: Command 0x20373100 timeout on address 2 hdac0: Command 0x20373100 timeout on address 2 hdac0: Command 0x20373100 timeout on address 2 hdac0: Command 0x20373100 timeout on address 2 hdac0: Command 0x20373100 timeout on address 2 hdac0: Command 0x20373100 timeout on address 2 hdac0: Command 0x20373100 timeout on address 2 hdac0: Command 0x20373100 timeout on address 2 hdac0: Command 0x20373100 timeout on address 2 hdac0: Command 0x20373100 timeout on address 2 hdac0: Command 0x20373000 timeout on address 2 hdac0: Command 0x20373184 timeout on address 2 hdac0: Command 0x20373101 timeout on address 2 hdac0: Command 0x2037310a timeout on address 2 hdac0: Command 0x20373170 timeout on address 2 hdac0: Command 0x20373101 timeout on address 2 hdac0: Command 0x20373100 timeout on address 2 hdac0: Command 0x20373100 timeout on address 2 hdac0: Command 0x20373100 timeout on address 2 hdac0: Command 0x20373000 timeout on address 2 hdac0: Command 0x203732c0 timeout on address 2 hdac0: Command 0x20270d00 timeout on address 2 hdac0: Command 0x20270600 timeout on address 2 hdac0: Command 0x20170503 timeout on address 2 nvme0: Waiting for reset to complete nvme0: Waiting for reset to complete nvme0: Waiting for reset to complete uhub0: at usbus1, port 1, addr 1 (disconnected) uhub0: detached rtsx0: Suspend uhub1: at usbus0, port 1, addr 1 (disconnected) ugen0.2: <ELAN Touchscreen> at usbus0 (disconnected) usbhid0: at uhub1, port 6, addr 1 (disconnected) hmt0: detached hidbus0: detached usbhid0: detached ugen0.3: <Azurewave Integrated Camera> at usbus0 (disconnected) ugen0.4: <vendor 0x8087 product 0x0aaa> at usbus0 (disconnected) uhub1: detached vgapci0: child drmn0 requested pci_set_powerstate acpi0: cleared fixed power button status vgapci0: child drmn0 requested pci_set_powerstate vgapci0: child drmn0 requested pci_enable_io vgapci0: child drmn0 requested pci_enable_io drmn0: [drm] [ENCODER:94:DDI A/PHY A] is disabled/in DSI mode with an ungated DDI clock, gate it drmn0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it drmn0: [drm] [ENCODER:117:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it rtsx0: Resume rtsx0: Controller timeout for CMD8 rtsx0: Controller timeout for CMD8 rtsx0: Controller timeout for CMD8 rtsx0: Controller timeout for CMD8 rtsx0: Controller timeout for CMD55 rtsx0: Controller timeout for CMD55 rtsx0: Controller timeout for CMD55 rtsx0: Controller timeout for CMD55 rtsx0: Controller timeout for CMD1 rtsx0: Controller timeout for CMD1 rtsx0: Controller timeout for CMD1 rtsx0: Controller timeout for CMD1 mmc0: No compatible cards found on bus uhub0 on usbus1 uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 nvme0: resubmitting queued i/o nvme0: WRITE (01) sqid:3 cid:0 nsid:1 lba:302583984 len:8 nvme0: done resubmitting i/o nvme0: resubmitting queued i/o nvme0: WRITE (01) sqid:4 cid:0 nsid:1 lba:302583976 len:8 nvme0: done resubmitting i/o hdac0: Command 0x20170500 timeout on address 2 hdac0: Command 0x20270500 timeout on address 2 hdac0: Command 0x20370500 timeout on address 2 hdac0: Command 0x2033b080 timeout on address 2 hdac0: Command 0x20370100 timeout on address 2 hdac0: Command 0x20370740 timeout on address 2 hdac0: Command 0x20370883 timeout on address 2 hdac0: Command 0x203f0900 timeout on address 2 hdac0: Command 0x203f0900 timeout on address 2 hdac0: Command 0x203f2e08 timeout on address 2 hdac0: Command 0x2033b000 timeout on address 2 uhub1 on usbus0 uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 uhub0: 4 ports with 4 removable, self powered uhub1: 18 ports with 18 removable, self powered pci2: unknown notify 0x2 ugen0.2: <ELAN Touchscreen> at usbus0 usbhid0 on uhub1 usbhid0: <ELAN Touchscreen, class 0/0, rev 2.00/59.11, addr 1> on usbus0 hidbus0: <HID bus> on usbhid0 hmt0: <ELAN Touchscreen> on hidbus0 hmt0: Multitouch touchscreen with 0 external buttons hmt0: 10 contacts with [WH] properties. Report range [0:0] - [3312:1872] ugen0.3: <Azurewave Integrated Camera> at usbus0 ugen0.4: <vendor 0x8087 product 0x0aaa> at usbus0

Verbatim

Switched back to 25; wifi is back.

vimanuelt

I created this for you to run on GhostBSD 26 to see what we can find.

xcrsz/ghostbsd-wifi-diagnostics

git clone xcrsz/ghostbsd-wifi-diagnostics
cd ghostbsd-wifi-diagnostics
sudo ./ghostbsd-wifi-diag

Produces:
ghostbsd-wifi-report-YYYYMMDD-HHMMSS/ # report tree
ghostbsd-wifi-report-YYYYMMDD-HHMMSS.tar.xz # archive for bug reports

Exit codes: 0 clean run, 1 usage error (not root, unwritable CWD), 2 diagnostics completed with at least one FAIL finding.

Verbatim

Thank you.

I ran it twice, the first time in v25, then rebooted and reran in v26.

Hmm, having a really hard time uploading these. "Uploading files of this type is not allowed."

vimanuelt

You can post the contents of the files here instead.

Verbatim

That's what I meant, logged in with github or with discord, attempting to upload here fails. That's also why the earlier file contents were posted rather than attached as files.

I tried changing the file extensions to bypass the filtering. Should still be able to open these.

Verbatim

Grr...

ht tp://wildwestgateway.ddns.net/ghostbsd-wifi-report-20260716-195838.tar.gz.jpeg
ht tp://wildwestgateway.ddns.net/ghostbsd-wifi-report-20260716-202826.tar.gz.jpeg

vimanuelt

The two files are corrupted.

Verbatim

Try changing extension back to tar.xz, not tar.gz.jpeg?

Contents should be ok

vimanuelt

I do not see those files online any longer.

Verbatim

ht tp://wildwestgateway.ddns.net/ghostbsd-wifi-report-20260716-195838.tar.xz
ht tp://wildwestgateway.ddns.net/ghostbsd-wifi-report-20260716-202826.tar.xz

vimanuelt

404 Not Found
ghostbsd-wifi-report-20260716-195838.tar.xz:
This item has not been found

404 Not Found
ghostbsd-wifi-report-20260716-202826.tar.xz:
This item has not been found

vimanuelt

At this point, it might be best to submit a bug request.
ghostbsd/issuesissues/new/choose

SteveM

iwm0: <Intel(R) Dual Band Wireless AC 9560> mem 0xb3d38000-0xb3d3bfff at device 20.3 on pci0  
iwm9000fw: could not load firmware image, error 2  
iwm0: could not read firmware iwm9000fw (error 0)  
device\_attach: iwm0 attach returned 6

$ perror 2
No such file or directory

It looks to me like the firmware for your wireless card cannot be found. In your case I believe this is provided by package GhostBSD-firmware-iwm. Make sure that this package is installed after upgrade to 26.

Possibly related to ghostbsd/issues357

wdt

On my freeBD install ,where wifi works (Same card, 9560)
iwlwifi is the driver. I have never seem iwm work on these
later cards, maybe it can be done,
Anyway dmesg tells you several times that the firmware is not loaded
ALL wifi devices need the proper firmware loaded, or they will not work
Working fw (also linux, same) ... 9000-pu-b0-jf-b0-46.ucode
(I hope I typed that in right)

vimanuelt

At this point, it might be best to submit a bug request.
ghostbsd/issuesissues/new/choose

wdt

In tricks and tips are instructions how to make
later intel wifi work, it worked for me