Where is the boot log?

Edward1978

I see a msg that says something isn't set properly. It is to fast to read all the way. Where is the boot.log to copy & paste?

tsesani

From a terminal type:

dmesg -a

Here is what mine looks like.

---<<BOOT>>--- Copyright (c) 1992-2025 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 15.0-RELEASE-p8 n230757-7c63d58780d2 GENERIC amd64 FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2) VT(efifb): resolution 1024x768 CPU: AMD Athlon Silver 3050U with Radeon Graphics (2295.78-MHz K8-class CPU) Origin="AuthenticAMD" Id=0x810f81 Family=0x17 Model=0x18 Stepping=1 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> AMD Features2=0x35c233ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX> Structured Extended Features=0x209c01a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,RDSEED,ADX,SMAP,CLFLUSHOPT,SHA> XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> AMD Extended Feature Extensions ID EBX=0x1007<CLZERO,IRPerf,XSaveErPtr,IBPB> SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768 TSC: P-state invariant, performance statistics real memory = 8589934592 (8192 MB) avail memory = 6087282688 (5805 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <HPQOEM 879E > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) random: registering fast source Intel Secure Key Seed random: fast provider: "Intel Secure Key Seed" random: unblocking device. ioapic0 <Version 2.1> irqs 0-23 ioapic1 <Version 2.1> irqs 24-55 Launching APs: 1 random: entropy device external interface kbd1 at kbdmux0 efirtc0: <EFI Realtime Clock> efirtc0: registered as a time-of-day clock, resolution 1.000000s smbios0: <System Management BIOS> at iomem 0x5d8ec000-0x5d8ec017 smbios0: Entry point: v3 (64-bit), Version: 3.2 aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> acpi0: <HPQOEM SLIC-MPC> Firmware Error (ACPI): Could not resolve symbol [\134_SB.PCI0.GPP2.BCM5], AE_NOT_FOUND (20250807/dswload2-315) ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20250807/psobject-372) acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 Event timer "HPET1" frequency 14318180 Hz quality 450 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x3> port 0x62,0x66 on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached) pcib1: <ACPI PCI-PCI bridge> at device 1.2 on pci0 pci1: <ACPI PCI bus> on pcib1 nvme0: <Generic NVMe Device> mem 0xfcf00000-0xfcf03fff irq 28 at device 0.0 on pci1 pcib2: <ACPI PCI-PCI bridge> at device 1.6 on pci0 pci2: <ACPI PCI bus> on pcib2 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xf000-0xf0ff mem 0xfce04000-0xfce04fff,0xfce00000-0xfce03fff irq 44 at device 0.0 on pci2 re0: Using 1 MSI-X message re0: turning off MSI enable bit. re0: ASPM disabled re0: Chip rev. 0x54000000 re0: MAC rev. 0x00100000 miibus0: <MII bus> on re0 rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: 6c:02:e0:06:92:12 re0: netmap queues/slots: TX 1/256, RX 1/256 pcib3: <ACPI PCI-PCI bridge> at device 1.7 on pci0 pci3: <ACPI PCI bus> on pcib3 pci3: <network> at device 0.0 (no driver attached) pcib4: <ACPI PCI-PCI bridge> at device 8.1 on pci0 pci4: <ACPI PCI bus> on pcib4 vgapci0: <VGA-compatible display> port 0xd000-0xd0ff mem 0xe0000000-0xefffffff,0xf0000000-0xf01fffff,0xfcb00000-0xfcb7ffff irq 52 at device 0.0 on pci4 vgapci0: Boot video device hdac0: <ATI (0x15de) HDA Controller> mem 0xfcbc8000-0xfcbcbfff irq 53 at device 0.1 on pci4 pci4: <encrypt/decrypt> at device 0.2 (no driver attached) xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfc900000-0xfc9fffff irq 55 at device 0.3 on pci4 xhci0: 64 bytes context size, 64-bit DMA xhci0: xECP capabilities <LEGACY,PROTO,PROTO,PROTO,PROTO,PROTO,DEBUG> usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 pci4: <multimedia> at device 0.5 (no driver attached) hdac1: <AMD Raven HDA Controller> mem 0xfcbc0000-0xfcbc7fff irq 54 at device 0.6 on pci4 isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 acpi_button0: <Power Button> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_acad0: <AC Adapter> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_tz1: <Thermal Zone> on acpi0 acpi_tz1: _CRT value is absurd, ignored (200.1C) atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] hwpstate0: <Cooln'Quiet 2.0> on cpu0
cpufreq0: <CPU frequency control> on cpu0
Timecounter "TSC-low" frequency 1147843697 Hz quality 1000
Timecounters tick every 1.000 msec
ugen0.1: <AMD XHCI root HUB> at usbus0
uhub0 on usbus0
uhub0: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
nvme0: Allocated 64MB host memory buffer
hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
hdacc1: <Realtek ALC236 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC236 Audio Function Group> at nid 1 on hdacc1
pcm1: <Realtek ALC236 (Analog)> at nid 20 and 25 on hdaa1
pcm2: <Realtek ALC236 (Analog)> at nid 33 and 18 on hdaa1
nda0 at nvme0 bus 0 scbus0 target 0 lun 1
nda0: <SAMSUNG MZVLQ256HAJD-000H1 HPS4NFXV S4UJNE1NA18320>
nda0: Serial Number S4UJNE1NA18320
nda0: nvme version 1.3
nda0: 244198MB (500118192 512 byte sectors)
Trying to mount root from zfs:zroot/ROOT/default []...
Setting hostuuid: 42f608b2-7210-3345-85f4-7e6f8ec8a9d4.
Setting hostid: 0x8b6821f1.
Starting file system checks:
Mounting local filesystems:.
Loading kernel modules: linux linux64 cuse fusefs hgame /boot/modules/amdgpu.ko
uhub0: 10 ports with 10 removable, self powered
Cuse v0.1.37 @ /dev/cuse
ugen0.2: <PixArt USB Optical Mouse> at usbus0
usbhid0 on uhub0
usbhid0: <PixArt USB Optical Mouse, class 0/0, rev 2.00/1.00, addr 1> on usbus0
hidbus0: <HID bus> on usbhid0
[drm] amdgpu kernel modesetting enabled.
drmn0: <drmn> on vgapci0
vgapci0: child drmn0 requested pci_enable_io
vgapci0: child drmn0 requested pci_enable_io
[drm] initializing kernel modesetting (RAVEN 0x1002:0x15D8 0x103C:0x879E 0xCD).
[drm] register mmio base: 0xFCB00000
[drm] register mmio size: 524288
[drm] add ip block number 0 <soc15_common>
[drm] add ip block number 1 <gmc_v9_0>
[drm] add ip block number 2 <vega10_ih>
[drm] add ip block number 3 <psp>
[drm] add ip block number 4 <powerplay>
[drm] add ip block number 5 <dm>
[drm] add ip block number 6 <gfx_v9_0>
[drm] add ip block number 7 <sdma_v4_0>
[drm] add ip block number 8 <vcn_v1_0>
amdgpu/raven2_gpu_info.bin: could not load binary firmware /boot/firmware/amdgpu/raven2_gpu_info.bin either
raven2_gpu_info.bin: could not load binary firmware /boot/firmware/raven2_gpu_info.bin either
amdgpu_raven2_gpu_info.bin: could not load binary firmware /boot/firmware/amdgpu_raven2_gpu_info.bin either
drmn0: successfully loaded firmware image 'amdgpu/raven2_gpu_info.bin'
[drm] BIOS signature incorrect 0 0
drmn0: Fetched VBIOS from ROM BAR
amdgpu: ATOM BIOS: 113-RAVEN2-117
amdgpu/raven2_asd.bin: could not load binary firmware /boot/firmware/amdgpu/raven2_asd.bin either
raven2_asd.bin: could not load binary firmware /boot/firmware/raven2_asd.bin either
amdgpu_raven2_asd.bin: could not load binary firmware /boot/firmware/amdgpu_raven2_asd.bin either
drmn0: successfully loaded firmware image 'amdgpu/raven2_asd.bin'
amdgpu/raven2_ta.bin: could not load binary firmware /boot/firmware/amdgpu/raven2_ta.bin either
raven2_ta.bin: could not load binary firmware /boot/firmware/raven2_ta.bin either
amdgpu_raven2_ta.bin: could not load binary firmware /boot/firmware/amdgpu_raven2_ta.bin either
drmn0: successfully loaded firmware image 'amdgpu/raven2_ta.bin'
amdgpu/raven2_pfp.bin: could not load binary firmware /boot/firmware/amdgpu/raven2_pfp.bin either
raven2_pfp.bin: could not load binary firmware /boot/firmware/raven2_pfp.bin either
amdgpu_raven2_pfp.bin: could not load binary firmware /boot/firmware/amdgpu_raven2_pfp.bin either
drmn0: successfully loaded firmware image 'amdgpu/raven2_pfp.bin'
amdgpu/raven2_me.bin: could not load binary firmware /boot/firmware/amdgpu/raven2_me.bin either
raven2_me.bin: could not load binary firmware /boot/firmware/raven2_me.bin either
amdgpu_raven2_me.bin: could not load binary firmware /boot/firmware/amdgpu_raven2_me.bin either
drmn0: successfully loaded firmware image 'amdgpu/raven2_me.bin'
amdgpu/raven2_ce.bin: could not load binary firmware /boot/firmware/amdgpu/raven2_ce.bin either
raven2_ce.bin: could not load binary firmware /boot/firmware/raven2_ce.bin either
amdgpu_raven2_ce.bin: could not load binary firmware /boot/firmware/amdgpu_raven2_ce.bin either
drmn0: successfully loaded firmware image 'amdgpu/raven2_ce.bin'
amdgpu/raven2_rlc.bin: could not load binary firmware /boot/firmware/amdgpu/raven2_rlc.bin either
raven2_rlc.bin: could not load binary firmware /boot/firmware/raven2_rlc.bin either
amdgpu_raven2_rlc.bin: could not load binary firmware /boot/firmware/amdgpu_raven2_rlc.bin either
drmn0: successfully loaded firmware image 'amdgpu/raven2_rlc.bin'
amdgpu/raven2_mec.bin: could not load binary firmware /boot/firmware/amdgpu/raven2_mec.bin either
raven2_mec.bin: could not load binary firmware /boot/firmware/raven2_mec.bin either
amdgpu_raven2_mec.bin: could not load binary firmware /boot/firmware/amdgpu_raven2_mec.bin either
drmn0: successfully loaded firmware image 'amdgpu/raven2_mec.bin'
amdgpu/raven2_mec2.bin: could not load binary firmware /boot/firmware/amdgpu/raven2_mec2.bin either
raven2_mec2.bin: could not load binary firmware /boot/firmware/raven2_mec2.bin either
amdgpu_raven2_mec2.bin: could not load binary firmware /boot/firmware/amdgpu_raven2_mec2.bin either
drmn0: successfully loaded firmware image 'amdgpu/raven2_mec2.bin'
amdgpu/raven2_sdma.bin: could not load binary firmware /boot/firmware/amdgpu/raven2_sdma.bin either
raven2_sdma.bin: could not load binary firmware /boot/firmware/raven2_sdma.bin either
amdgpu_raven2_sdma.bin: could not load binary firmware /boot/firmware/amdgpu_raven2_sdma.bin either
drmn0: successfully loaded firmware image 'amdgpu/raven2_sdma.bin'
[drm] VCN decode is enabled in VM mode
[drm] VCN encode is enabled in VM mode
[drm] JPEG decode is enabled in VM mode
amdgpu/raven2_vcn.bin: could not load binary firmware /boot/firmware/amdgpu/raven2_vcn.bin either
raven2_vcn.bin: could not load binary firmware /boot/firmware/raven2_vcn.bin either
amdgpu_raven2_vcn.bin: could not load binary firmware /boot/firmware/amdgpu_raven2_vcn.bin either
drmn0: successfully loaded firmware image 'amdgpu/raven2_vcn.bin'
drmn0: Trusted Memory Zone (TMZ) feature enabled
drmn0: PCIE atomic ops is not supported
[drm] vm size is 262144 GB, 3 levels, block size is 9-bit, fragment size is 9-bit
drmn0: VRAM: 2048M 0x000000F400000000 - 0x000000F47FFFFFFF (2048M used)
drmn0: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF
drmn0: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF
[drm] Detected VRAM RAM=2048M, BAR=2048M
[drm] RAM width 64bits DDR4
[drm] amdgpu: 2048M of VRAM memory ready
[drm] amdgpu: 3008M of GTT memory ready.
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] PCIE GART of 1024M enabled.
[drm] PTB located at 0x000000F400A00000
amdgpu: hwmgr_sw_init smu backed is smu10_smu
amdgpu/raven_dmcu.bin: could not load binary firmware /boot/firmware/amdgpu/raven_dmcu.bin either
raven_dmcu.bin: could not load binary firmware /boot/firmware/raven_dmcu.bin either
amdgpu_raven_dmcu.bin: could not load binary firmware /boot/firmware/amdgpu_raven_dmcu.bin either
drmn0: successfully loaded firmware image 'amdgpu/raven_dmcu.bin'
[drm] Found VCN firmware Version ENC: 1.15 DEC: 3 VEP: 0 Revision: 0
drmn0: Will use PSP to load VCN firmware
[drm] reserve 0x400000 from 0xf47fc00000 for PSP TMR
[drm] failed to load ucode RLC_RESTORE_LIST_CNTL(0x28) <4>[drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF300F)
[drm] failed to load ucode RLC_RESTORE_LIST_GPM_MEM(0x29) <4>[drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF000F)
[drm] failed to load ucode RLC_RESTORE_LIST_SRM_MEM(0x2A) <4>[drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF000F)
drmn0: RAS: optional ras ta ucode is not available
drmn0: RAP: optional rap ta ucode is not available
drmn0: SECUREDISPLAY: securedisplay ta ucode is not available
[drm] DM_PPLIB: values for F clock
[drm] DM_PPLIB: 400000 in kHz, 3174 in mV
[drm] DM_PPLIB: 933000 in kHz, 3724 in mV
[drm] DM_PPLIB: 1067000 in kHz, 3924 in mV
[drm] DM_PPLIB: 1200000 in kHz, 4074 in mV
[drm] DM_PPLIB: values for DCF clock
[drm] DM_PPLIB: 300000 in kHz, 3174 in mV
[drm] DM_PPLIB: 600000 in kHz, 3724 in mV
[drm] DM_PPLIB: 626000 in kHz, 3924 in mV
[drm] DM_PPLIB: 654000 in kHz, 4074 in mV
[drm] Display Core v3.2.247 initialized on DCN 1.0.1
lkpi_iic0: <LinuxKPI I2C> on drmn0
iicbus0: <Philips I2C bus> on lkpi_iic0
iic0: <I2C generic I/O> on iicbus0
lkpi_iic1: <LinuxKPI I2C> on drmn0
iicbus1: <Philips I2C bus> on lkpi_iic1
iic1: <I2C generic I/O> on iicbus1
[drm] kiq ring mec 2 pipe 1 q 0
[drm] VCN decode and encode initialized successfully(under SPG Mode).
drmn0: SE 1, SH per SE 1, CU per SH 3, active_cu_number 2
drmn0: ring gfx uses VM inv eng 0 on hub 0
drmn0: ring gfx_low uses VM inv eng 1 on hub 0
drmn0: ring gfx_high uses VM inv eng 4 on hub 0
drmn0: ring comp_1.0.0 uses VM inv eng 5 on hub 0
drmn0: ring comp_1.1.0 uses VM inv eng 6 on hub 0
drmn0: ring comp_1.2.0 uses VM inv eng 7 on hub 0
drmn0: ring comp_1.3.0 uses VM inv eng 8 on hub 0
drmn0: ring comp_1.0.1 uses VM inv eng 9 on hub 0
drmn0: ring comp_1.1.1 uses VM inv eng 10 on hub 0
drmn0: ring comp_1.2.1 uses VM inv eng 11 on hub 0
drmn0: ring comp_1.3.1 uses VM inv eng 12 on hub 0
drmn0: ring kiq_0.2.1.0 uses VM inv eng 13 on hub 0
drmn0: ring sdma0 uses VM inv eng 0 on hub 8
drmn0: ring vcn_dec uses VM inv eng 1 on hub 8
drmn0: ring vcn_enc0 uses VM inv eng 4 on hub 8
drmn0: ring vcn_enc1 uses VM inv eng 5 on hub 8
drmn0: ring jpeg_dec uses VM inv eng 6 on hub 8
vgapci0: child drmn0 requested pci_get_powerstate
sysctl_add_oid: can't re-use a leaf (hw.dri.debug)!
lkpi_iic2: <LinuxKPI I2C> on drm1
iicbus2: <Philips I2C bus> on lkpi_iic2
iic2: <I2C generic I/O> on iicbus2
[drm] Initialized amdgpu 3.54.0 20150101 for drmn0 on minor 0
VT: Replacing driver "efifb" with new "drmfb".
start FB_INFO:
height=768 width=1366 depth=32
pbase=0x112401000 vbase=0xfffffe0096201000
name=drmn0 id=amdgpudrmfb flags=0x0 stride=5632
end FB_INFO
ugen0.3: <Chicony Electronics Co.,Ltd. HP TrueVision HD Camera> at usbus0
Autoloading module: acpi_wmi
Autoloading module: hms
Autoloading module: if_rtw88
Autoloading module: ig4
Autoloading module: intpm
intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0
smbus0: <System Management Bus> on intsmb0
rtw880: <rtw88> port 0xe000-0xe0ff mem 0xfcd00000-0xfcd0ffff irq 48 at device 0.0 on pci3
rtw880: successfully loaded firmware image 'rtw88/rtw8821c_fw.bin'
rtw880: Firmware version 24.11.0, H2C version 12
ig4iic0: <Designware I2C Controller> iomem 0xfedc5000-0xfedc5fff irq 6 on acpi0
iicbus3: <Philips I2C bus (ACPI-hinted)> on ig4iic0
ugen0.4: <Realtek Bluetooth Radio> at usbus0
iicbus3: <unknown card> at addr 0x15
iic3: <I2C generic I/O> on iicbus3
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: Embedded MOF found
hms0: <PixArt USB Optical Mouse> on hidbus0
hms0: 8 buttons and [XYW] coordinates ID=0
ELF ldconfig path: /lib /usr/lib /usr/local/lib /usr/local/lib/compat/pkg /usr/local/dt/lib /usr/local/lib/alsa-lib /usr/local/lib/compat/pkg /usr/local/lib/e2fsprogs /usr/local/lib/gcc14 /usr/local/lib/liteide /usr/local/lib/perl5/5.42/mach/CORE /usr/local/lib/qt5 /usr/local/lib/qt6 /usr/local/lib/samba4 /usr/local/llvm19/lib /usr/local/llvm19/lib/x86_64-portbld-freebsd15.0 /usr/local/openjdk8-jre/lib/amd64 /usr/local/share/iridium
32-bit compatibility ldconfig path: /usr/lib32 /usr/local/lib32/gcc14
Setting hostname: claudville.va.
Setting up harvesting: PURE_RDSEED,RANDOMDEV,[CALLOUT],[UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,[NET_ETHER],NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED
Feeding entropy: .
wlan0: Ethernet address: 20:4e:f6:a4:72:d9
re0: link state changed to UP
lo0: link state changed to UP
re0: link state changed to DOWN
Starting wpa_supplicant.
Starting Network: lo0 re0 wlan0.
lo0: flags=1008049<UP,LOOPBACK,RUNNING,MULTICAST,LOWER_UP> metric 0 mtu 16384
options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
groups: lo
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
ether 6c:02:e0:06:92:12
media: Ethernet autoselect (none)
status: no carrier
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
wlan0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=0
ether 20:4e:f6:a4:72:d9
groups: wlan
ssid "" channel 1 (2412 MHz 11b)
regdomain FCC country US authmode OPEN privacy OFF txpower 30 bmiss 7
scanvalid 60 wme bintval 0
parent interface: rtw880
media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
status: no carrier
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
Starting webcamd.
Starting devd.
rtlbtfw: rtlbt_fw_read: open: /usr/local/share/rtlbt-firmware/rtl8821c_fw.bin: No such file or directory
Autoloading module: ng_ubt
Autoloading module: iichid
Starting event5 moused.
Starting dhclient.
re0: no link ...
re0: link state changed to UP
got link
DHCPREQUEST on re0 to 255.255.255.255 port 67
DHCPACK from 192.168.0.1
bound to 192.168.0.50 -- renewal in 43200 seconds.
route: message indicates error: File exists
add host 127.0.0.1: gateway lo0 fib 0: route already in table
route: message indicates error: File exists
add host ::1: gateway lo0 fib 0: route already in table
add net fe80::: gateway ::1
add net ff02::: gateway ::1
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled
sysctl: unknown oid 'hw.usb.uaudio.default_channels' at line 20
Flushed all rules.
00100 allow ip from any to any via lo0
00200 deny ip from any to 127.0.0.0/8
00300 deny ip from 127.0.0.0/8 to any
00400 deny ip from any to ::1
00500 deny ip from ::1 to any
00600 allow ipv6-icmp from :: to ff02::/16
00700 allow ipv6-icmp from fe80::/10 to fe80::/10
00800 allow ipv6-icmp from fe80::/10 to ff02::/16
00900 allow ipv6-icmp from any to any icmp6types 1
01000 allow ipv6-icmp from any to any icmp6types 2,135,136
00000 check-state :default
01200 allow tcp from me to any established
00000 allow tcp from me to any setup keep-state :default
00000 allow udp from me to any keep-state :default
00000 allow icmp from me to any keep-state :default
00000 allow ipv6-icmp from me to any keep-state :default
01700 allow udp from 0.0.0.0 68 to 255.255.255.255 67 out
01800 allow udp from any 67 to me 68 in
01900 allow udp from any 67 to 255.255.255.255 68 in
02000 allow udp from fe80::/10 to me 546 in
02100 allow icmp from any to any icmptypes 8
02200 allow ipv6-icmp from any to any icmp6types 128,129
02300 allow icmp from any to any icmptypes 3,4,11
02400 allow ipv6-icmp from any to any icmp6types 3
ipfw: hostname ``trusted'' unknown
02500 allow ip from 192.168.0.0/24 to me
65000 count ip from any to any
65100 deny { tcp or udp } from any to any 135-139,445 in
65200 deny { tcp or udp } from any to any 1026,1027 in
65300 deny { tcp or udp } from any to any 1433,1434 in
65400 deny ip from any to 255.255.255.255
65500 deny ip from any to 224.0.0.0/24 in
65500 deny udp from any to any 520 in
65500 deny tcp from any 80,443 to any 1024-65535 in
65500 deny ip from any to any
Firewall rules loaded.
/etc/rc: WARNING: $xconfig_enable is not set properly - see rc.conf(5).
Updating motd:.
Clearing /tmp.
Updating /var/run/os-release done.
Creating and/or trimming log files.
Starting syslogd.
Jun 24 22:10:23 claudville kernel: [drm] failed to load ucode RLC_RESTORE_LIST_CNTL(0x28) <4>[drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF300F)
Jun 24 22:10:23 claudville kernel: [drm] failed to load ucode RLC_RESTORE_LIST_GPM_MEM(0x29) <4>[drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF000F)
Jun 24 22:10:23 claudville kernel: [drm] failed to load ucode RLC_RESTORE_LIST_SRM_MEM(0x2A) <4>[drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF000F)
Starting default moused.
Mounting late filesystems:.
Starting dbus.
Starting avahi-daemon.
Starting cupsd.
Starting avahi-dnsconfd.
sysctl: unknown oid 'hw.usb.uaudio.default_channels' at line 20
Performing sanity check on sshd configuration.
Starting sshd.
Starting cron.
Configuring vt: keymap.
Starting lightdm.
Starting background file system checks in 60 seconds.

Wed Jun 24 22:10:24 EDT 2026
Jun 24 22:10:24 claudville lightdm[2822]: gkr-pam: unable to locate daemon control file
Jun 24 22:10:33 claudville lightdm[2850]: gkr-pam: unable to locate daemon control file
Jun 24 22:10:33 claudville syslogd: last message repeated 1 times
Jun 24 22:10:56 claudville shutdown[2898]: reboot by tsesani:
Stopping lightdm.
Waiting for PIDS: 2779.
Stopping sshd.
Waiting for PIDS: 2751.
Stopping cron.
Waiting for PIDS: 2756.
Stopping cupsd.
Waiting for PIDS: 2693.
Stopping devd.
Waiting for PIDS: 2134.
Stopping webcamd.
Waiting for PIDs: 1404
Writing entropy file: .
Writing early boot entropy file: .
.
Terminated
Jun 24 22:10:59 claudville syslogd: exiting on signal 15
Waiting (max 60 seconds) for system process vnlru' to stop... done Waiting (max 60 seconds) for system processsyncer' to stop...
Syncing disks, vnodes remaining... 0 0 done
All buffers synced.
Uptime: 45s
---<<BOOT>>---
Copyright (c) 1992-2025 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 15.0-RELEASE-p8 n230757-7c63d58780d2 GENERIC amd64
FreeBSD clang version 19.1.7 (llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2)
VT(efifb): resolution 1024x768
CPU: AMD Athlon Silver 3050U with Radeon Graphics (2295.78-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0x810f81 Family=0x17 Model=0x18 Stepping=1
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
AMD Features2=0x35c233ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX>
Structured Extended Features=0x209c01a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,RDSEED,ADX,SMAP,CLFLUSHOPT,SHA>
XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
AMD Extended Feature Extensions ID EBX=0x1007<CLZERO,IRPerf,XSaveErPtr,IBPB>
SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768
TSC: P-state invariant, performance statistics
real memory = 8589934592 (8192 MB)
avail memory = 6087282688 (5805 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <HPQOEM 879E >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
random: registering fast source Intel Secure Key Seed
random: fast provider: "Intel Secure Key Seed"
random: unblocking device.
ioapic0 <Version 2.1> irqs 0-23
ioapic1 <Version 2.1> irqs 24-55
Launching APs: 1
random: entropy device external interface
kbd1 at kbdmux0
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
smbios0: <System Management BIOS> at iomem 0x5d8ec000-0x5d8ec017
smbios0: Entry point: v3 (64-bit), Version: 3.2
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256>
acpi0: <HPQOEM SLIC-MPC>
Firmware Error (ACPI): Could not resolve symbol [\134_SB.PCI0.GPP2.BCM5], AE_NOT_FOUND (20250807/dswload2-315)
ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20250807/psobject-372)
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 450
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x3> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 1.2 on pci0
pci1: <ACPI PCI bus> on pcib1
nvme0: <Generic NVMe Device> mem 0xfcf00000-0xfcf03fff irq 28 at device 0.0 on pci1
pcib2: <ACPI PCI-PCI bridge> at device 1.6 on pci0
pci2: <ACPI PCI bus> on pcib2
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xf000-0xf0ff mem 0xfce04000-0xfce04fff,0xfce00000-0xfce03fff irq 44 at device 0.0 on pci2
re0: Using 1 MSI-X message
re0: ASPM disabled
re0: Chip rev. 0x54000000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: 6c:02:e0:06:92:12
re0: netmap queues/slots: TX 1/256, RX 1/256
pcib3: <ACPI PCI-PCI bridge> at device 1.7 on pci0
pci3: <ACPI PCI bus> on pcib3
pci3: <network> at device 0.0 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> at device 8.1 on pci0
pci4: <ACPI PCI bus> on pcib4
vgapci0: <VGA-compatible display> port 0xd000-0xd0ff mem 0xe0000000-0xefffffff,0xf0000000-0xf01fffff,0xfcb00000-0xfcb7ffff irq 52 at device 0.0 on pci4
vgapci0: Boot video device
hdac0: <ATI (0x15de) HDA Controller> mem 0xfcbc8000-0xfcbcbfff irq 53 at device 0.1 on pci4
pci4: <encrypt/decrypt> at device 0.2 (no driver attached)
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfc900000-0xfc9fffff irq 55 at device 0.3 on pci4
xhci0: 64 bytes context size, 64-bit DMA
xhci0: xECP capabilities <LEGACY,PROTO,PROTO,PROTO,PROTO,PROTO,DEBUG>
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci4: <multimedia> at device 0.5 (no driver attached)
hdac1: <AMD Raven HDA Controller> mem 0xfcbc0000-0xfcbc7fff irq 54 at device 0.6 on pci4
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Power Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
acpi_tz1: _CRT value is absurd, ignored (200.1C)
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
cpufreq0: <CPU frequency control> on cpu0
Timecounter "TSC-low" frequency 1147843771 Hz quality 1000
Timecounters tick every 1.000 msec
ugen0.1: <AMD XHCI root HUB> at usbus0
uhub0 on usbus0
uhub0: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
nvme0: Allocated 64MB host memory buffer
hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
hdacc1: <Realtek ALC236 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC236 Audio Function Group> at nid 1 on hdacc1
pcm1: <Realtek ALC236 (Analog)> at nid 20 and 25 on hdaa1
pcm2: <Realtek ALC236 (Analog)> at nid 33 and 18 on hdaa1
nda0 at nvme0 bus 0 scbus0 target 0 lun 1
nda0: <SAMSUNG MZVLQ256HAJD-000H1 HPS4NFXV S4UJNE1NA18320>
nda0: Serial Number S4UJNE1NA18320
nda0: nvme version 1.3
nda0: 244198MB (500118192 512 byte sectors)
Trying to mount root from zfs:zroot/ROOT/default []...
Setting hostuuid: 42f608b2-7210-3345-85f4-7e6f8ec8a9d4.
Setting hostid: 0x8b6821f1.
Starting file system checks:
Mounting local filesystems:.
Loading kernel modules: linux linux64 cuse fusefs hgame /boot/modules/amdgpu.ko
uhub0: 10 ports with 10 removable, self powered
Cuse v0.1.37 @ /dev/cuse
ugen0.2: <PixArt USB Optical Mouse> at usbus0
usbhid0 on uhub0
usbhid0: <PixArt USB Optical Mouse, class 0/0, rev 2.00/1.00, addr 1> on usbus0
hidbus0: <HID bus> on usbhid0
[drm] amdgpu kernel modesetting enabled.
drmn0: <drmn> on vgapci0
vgapci0: child drmn0 requested pci_enable_io
vgapci0: child drmn0 requested pci_enable_io
[drm] initializing kernel modesetting (RAVEN 0x1002:0x15D8 0x103C:0x879E 0xCD).
[drm] register mmio base: 0xFCB00000
[drm] register mmio size: 524288
[drm] add ip block number 0 <soc15_common>
[drm] add ip block number 1 <gmc_v9_0>
[drm] add ip block number 2 <vega10_ih>
[drm] add ip block number 3 <psp>
[drm] add ip block number 4 <powerplay>
[drm] add ip block number 5 <dm>
[drm] add ip block number 6 <gfx_v9_0>
[drm] add ip block number 7 <sdma_v4_0>
[drm] add ip block number 8 <vcn_v1_0>
amdgpu/raven2_gpu_info.bin: could not load binary firmware /boot/firmware/amdgpu/raven2_gpu_info.bin either
raven2_gpu_info.bin: could not load binary firmware /boot/firmware/raven2_gpu_info.bin either
amdgpu_raven2_gpu_info.bin: could not load binary firmware /boot/firmware/amdgpu_raven2_gpu_info.bin either
drmn0: successfully loaded firmware image 'amdgpu/raven2_gpu_info.bin'
[drm] BIOS signature incorrect 0 0
drmn0: Fetched VBIOS from ROM BAR
amdgpu: ATOM BIOS: 113-RAVEN2-117
amdgpu/raven2_asd.bin: could not load binary firmware /boot/firmware/amdgpu/raven2_asd.bin either
raven2_asd.bin: could not load binary firmware /boot/firmware/raven2_asd.bin either
amdgpu_raven2_asd.bin: could not load binary firmware /boot/firmware/amdgpu_raven2_asd.bin either
drmn0: successfully loaded firmware image 'amdgpu/raven2_asd.bin'
amdgpu/raven2_ta.bin: could not load binary firmware /boot/firmware/amdgpu/raven2_ta.bin either
raven2_ta.bin: could not load binary firmware /boot/firmware/raven2_ta.bin either
amdgpu_raven2_ta.bin: could not load binary firmware /boot/firmware/amdgpu_raven2_ta.bin either
drmn0: successfully loaded firmware image 'amdgpu/raven2_ta.bin'
amdgpu/raven2_pfp.bin: could not load binary firmware /boot/firmware/amdgpu/raven2_pfp.bin either
raven2_pfp.bin: could not load binary firmware /boot/firmware/raven2_pfp.bin either
amdgpu_raven2_pfp.bin: could not load binary firmware /boot/firmware/amdgpu_raven2_pfp.bin either
drmn0: successfully loaded firmware image 'amdgpu/raven2_pfp.bin'
amdgpu/raven2_me.bin: could not load binary firmware /boot/firmware/amdgpu/raven2_me.bin either
raven2_me.bin: could not load binary firmware /boot/firmware/raven2_me.bin either
amdgpu_raven2_me.bin: could not load binary firmware /boot/firmware/amdgpu_raven2_me.bin either
drmn0: successfully loaded firmware image 'amdgpu/raven2_me.bin'
amdgpu/raven2_ce.bin: could not load binary firmware /boot/firmware/amdgpu/raven2_ce.bin either
raven2_ce.bin: could not load binary firmware /boot/firmware/raven2_ce.bin either
amdgpu_raven2_ce.bin: could not load binary firmware /boot/firmware/amdgpu_raven2_ce.bin either
drmn0: successfully loaded firmware image 'amdgpu/raven2_ce.bin'
amdgpu/raven2_rlc.bin: could not load binary firmware /boot/firmware/amdgpu/raven2_rlc.bin either
raven2_rlc.bin: could not load binary firmware /boot/firmware/raven2_rlc.bin either
amdgpu_raven2_rlc.bin: could not load binary firmware /boot/firmware/amdgpu_raven2_rlc.bin either
drmn0: successfully loaded firmware image 'amdgpu/raven2_rlc.bin'
amdgpu/raven2_mec.bin: could not load binary firmware /boot/firmware/amdgpu/raven2_mec.bin either
raven2_mec.bin: could not load binary firmware /boot/firmware/raven2_mec.bin either
amdgpu_raven2_mec.bin: could not load binary firmware /boot/firmware/amdgpu_raven2_mec.bin either
drmn0: successfully loaded firmware image 'amdgpu/raven2_mec.bin'
amdgpu/raven2_mec2.bin: could not load binary firmware /boot/firmware/amdgpu/raven2_mec2.bin either
raven2_mec2.bin: could not load binary firmware /boot/firmware/raven2_mec2.bin either
amdgpu_raven2_mec2.bin: could not load binary firmware /boot/firmware/amdgpu_raven2_mec2.bin either
drmn0: successfully loaded firmware image 'amdgpu/raven2_mec2.bin'
amdgpu/raven2_sdma.bin: could not load binary firmware /boot/firmware/amdgpu/raven2_sdma.bin either
raven2_sdma.bin: could not load binary firmware /boot/firmware/raven2_sdma.bin either
amdgpu_raven2_sdma.bin: could not load binary firmware /boot/firmware/amdgpu_raven2_sdma.bin either
drmn0: successfully loaded firmware image 'amdgpu/raven2_sdma.bin'
[drm] VCN decode is enabled in VM mode
[drm] VCN encode is enabled in VM mode
[drm] JPEG decode is enabled in VM mode
amdgpu/raven2_vcn.bin: could not load binary firmware /boot/firmware/amdgpu/raven2_vcn.bin either
raven2_vcn.bin: could not load binary firmware /boot/firmware/raven2_vcn.bin either
amdgpu_raven2_vcn.bin: could not load binary firmware /boot/firmware/amdgpu_raven2_vcn.bin either
drmn0: successfully loaded firmware image 'amdgpu/raven2_vcn.bin'
drmn0: Trusted Memory Zone (TMZ) feature enabled
drmn0: PCIE atomic ops is not supported
[drm] vm size is 262144 GB, 3 levels, block size is 9-bit, fragment size is 9-bit
drmn0: VRAM: 2048M 0x000000F400000000 - 0x000000F47FFFFFFF (2048M used)
drmn0: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF
drmn0: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF
[drm] Detected VRAM RAM=2048M, BAR=2048M
[drm] RAM width 64bits DDR4
[drm] amdgpu: 2048M of VRAM memory ready
[drm] amdgpu: 3008M of GTT memory ready.
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] PCIE GART of 1024M enabled.
[drm] PTB located at 0x000000F400A00000
amdgpu: hwmgr_sw_init smu backed is smu10_smu
amdgpu/raven_dmcu.bin: could not load binary firmware /boot/firmware/amdgpu/raven_dmcu.bin either
raven_dmcu.bin: could not load binary firmware /boot/firmware/raven_dmcu.bin either
amdgpu_raven_dmcu.bin: could not load binary firmware /boot/firmware/amdgpu_raven_dmcu.bin either
drmn0: successfully loaded firmware image 'amdgpu/raven_dmcu.bin'
[drm] Found VCN firmware Version ENC: 1.15 DEC: 3 VEP: 0 Revision: 0
drmn0: Will use PSP to load VCN firmware
[drm] reserve 0x400000 from 0xf47fc00000 for PSP TMR
[drm] failed to load ucode RLC_RESTORE_LIST_CNTL(0x28) <4>[drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF300F)
[drm] failed to load ucode RLC_RESTORE_LIST_GPM_MEM(0x29) <4>[drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF000F)
[drm] failed to load ucode RLC_RESTORE_LIST_SRM_MEM(0x2A) <4>[drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF000F)
drmn0: RAS: optional ras ta ucode is not available
drmn0: RAP: optional rap ta ucode is not available
drmn0: SECUREDISPLAY: securedisplay ta ucode is not available
[drm] DM_PPLIB: values for F clock
[drm] DM_PPLIB: 400000 in kHz, 3174 in mV
[drm] DM_PPLIB: 933000 in kHz, 3724 in mV
[drm] DM_PPLIB: 1067000 in kHz, 3924 in mV
[drm] DM_PPLIB: 1200000 in kHz, 4074 in mV
[drm] DM_PPLIB: values for DCF clock
[drm] DM_PPLIB: 300000 in kHz, 3174 in mV
[drm] DM_PPLIB: 600000 in kHz, 3724 in mV
[drm] DM_PPLIB: 626000 in kHz, 3924 in mV
[drm] DM_PPLIB: 654000 in kHz, 4074 in mV
[drm] Display Core v3.2.247 initialized on DCN 1.0.1
lkpi_iic0: <LinuxKPI I2C> on drmn0
iicbus0: <Philips I2C bus> on lkpi_iic0
iic0: <I2C generic I/O> on iicbus0
lkpi_iic1: <LinuxKPI I2C> on drmn0
iicbus1: <Philips I2C bus> on lkpi_iic1
iic1: <I2C generic I/O> on iicbus1
[drm] kiq ring mec 2 pipe 1 q 0
[drm] VCN decode and encode initialized successfully(under SPG Mode).
drmn0: SE 1, SH per SE 1, CU per SH 3, active_cu_number 2
drmn0: ring gfx uses VM inv eng 0 on hub 0
drmn0: ring gfx_low uses VM inv eng 1 on hub 0
drmn0: ring gfx_high uses VM inv eng 4 on hub 0
drmn0: ring comp_1.0.0 uses VM inv eng 5 on hub 0
drmn0: ring comp_1.1.0 uses VM inv eng 6 on hub 0
drmn0: ring comp_1.2.0 uses VM inv eng 7 on hub 0
drmn0: ring comp_1.3.0 uses VM inv eng 8 on hub 0
drmn0: ring comp_1.0.1 uses VM inv eng 9 on hub 0
drmn0: ring comp_1.1.1 uses VM inv eng 10 on hub 0
drmn0: ring comp_1.2.1 uses VM inv eng 11 on hub 0
drmn0: ring comp_1.3.1 uses VM inv eng 12 on hub 0
drmn0: ring kiq_0.2.1.0 uses VM inv eng 13 on hub 0
drmn0: ring sdma0 uses VM inv eng 0 on hub 8
drmn0: ring vcn_dec uses VM inv eng 1 on hub 8
drmn0: ring vcn_enc0 uses VM inv eng 4 on hub 8
drmn0: ring vcn_enc1 uses VM inv eng 5 on hub 8
drmn0: ring jpeg_dec uses VM inv eng 6 on hub 8
vgapci0: child drmn0 requested pci_get_powerstate
sysctl_add_oid: can't re-use a leaf (hw.dri.debug)!
lkpi_iic2: <LinuxKPI I2C> on drm1
iicbus2: <Philips I2C bus> on lkpi_iic2
iic2: <I2C generic I/O> on iicbus2
[drm] Initialized amdgpu 3.54.0 20150101 for drmn0 on minor 0
VT: Replacing driver "efifb" with new "drmfb".
start FB_INFO:
height=768 width=1366 depth=32
pbase=0x118e3a000 vbase=0xfffffe009643a000
name=drmn0 id=amdgpudrmfb flags=0x0 stride=5632
end FB_INFO
ugen0.3: <Chicony Electronics Co.,Ltd. HP TrueVision HD Camera> at usbus0
Autoloading module: acpi_wmi
Autoloading module: hms
Autoloading module: if_rtw88
Autoloading module: ig4
Autoloading module: intpm
intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0
smbus0: <System Management Bus> on intsmb0
rtw880: <rtw88> port 0xe000-0xe0ff mem 0xfcd00000-0xfcd0ffff irq 48 at device 0.0 on pci3
rtw880: successfully loaded firmware image 'rtw88/rtw8821c_fw.bin'
rtw880: Firmware version 24.11.0, H2C version 12
ig4iic0: <Designware I2C Controller> iomem 0xfedc5000-0xfedc5fff irq 6 on acpi0
iicbus3: <Philips I2C bus (ACPI-hinted)> on ig4iic0
ugen0.4: <Realtek Bluetooth Radio> at usbus0
iicbus3: <unknown card> at addr 0x15
iic3: <I2C generic I/O> on iicbus3
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: Embedded MOF found
hms0: <PixArt USB Optical Mouse> on hidbus0
hms0: 8 buttons and [XYW] coordinates ID=0
ELF ldconfig path: /lib /usr/lib /usr/local/lib /usr/local/lib/compat/pkg /usr/local/dt/lib /usr/local/lib/alsa-lib /usr/local/lib/compat/pkg /usr/local/lib/e2fsprogs /usr/local/lib/gcc14 /usr/local/lib/liteide /usr/local/lib/perl5/5.42/mach/CORE /usr/local/lib/qt5 /usr/local/lib/qt6 /usr/local/lib/samba4 /usr/local/llvm19/lib /usr/local/llvm19/lib/x86_64-portbld-freebsd15.0 /usr/local/openjdk8-jre/lib/amd64 /usr/local/share/iridium
32-bit compatibility ldconfig path: /usr/lib32 /usr/local/lib32/gcc14
Setting hostname: claudville.va.
Setting up harvesting: PURE_RDSEED,RANDOMDEV,[CALLOUT],[UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,[NET_ETHER],NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED
Feeding entropy: .
wlan0: Ethernet address: 20:4e:f6:a4:72:d9
re0: link state changed to UP
lo0: link state changed to UP
re0: link state changed to DOWN
Starting wpa_supplicant.
Starting Network: lo0 re0 wlan0.
lo0: flags=1008049<UP,LOOPBACK,RUNNING,MULTICAST,LOWER_UP> metric 0 mtu 16384
options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
groups: lo
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
ether 6c:02:e0:06:92:12
media: Ethernet autoselect (none)
status: no carrier
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
wlan0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=0
ether 20:4e:f6:a4:72:d9
groups: wlan
ssid "" channel 1 (2412 MHz 11b)
regdomain FCC country US authmode OPEN privacy OFF txpower 30 bmiss 7
scanvalid 60 wme bintval 0
parent interface: rtw880
media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
status: no carrier
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
Starting webcamd.
Starting devd.
rtlbtfw: rtlbt_fw_read: open: /usr/local/share/rtlbt-firmware/rtl8821c_fw.bin: No such file or directory
Autoloading module: ng_ubt
Autoloading module: iichid
Starting event5 moused.
Starting dhclient.
re0: no link ...
re0: link state changed to UP
got link
DHCPREQUEST on re0 to 255.255.255.255 port 67
DHCPACK from 192.168.0.1
bound to 192.168.0.50 -- renewal in 43200 seconds.
route: message indicates error: File exists
add host 127.0.0.1: gateway lo0 fib 0: route already in table
route: message indicates error: File exists
add host ::1: gateway lo0 fib 0: route already in table
add net fe80::: gateway ::1
add net ff02::: gateway ::1
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled
sysctl: unknown oid 'hw.usb.uaudio.default_channels' at line 20
Flushed all rules.
00100 allow ip from any to any via lo0
00200 deny ip from any to 127.0.0.0/8
00300 deny ip from 127.0.0.0/8 to any
00400 deny ip from any to ::1
00500 deny ip from ::1 to any
00600 allow ipv6-icmp from :: to ff02::/16
00700 allow ipv6-icmp from fe80::/10 to fe80::/10
00800 allow ipv6-icmp from fe80::/10 to ff02::/16
00900 allow ipv6-icmp from any to any icmp6types 1
01000 allow ipv6-icmp from any to any icmp6types 2,135,136
00000 check-state :default
01200 allow tcp from me to any established
00000 allow tcp from me to any setup keep-state :default
00000 allow udp from me to any keep-state :default
00000 allow icmp from me to any keep-state :default
00000 allow ipv6-icmp from me to any keep-state :default
01700 allow udp from 0.0.0.0 68 to 255.255.255.255 67 out
01800 allow udp from any 67 to me 68 in
01900 allow udp from any 67 to 255.255.255.255 68 in
02000 allow udp from fe80::/10 to me 546 in
02100 allow icmp from any to any icmptypes 8
02200 allow ipv6-icmp from any to any icmp6types 128,129
02300 allow icmp from any to any icmptypes 3,4,11
02400 allow ipv6-icmp from any to any icmp6types 3
ipfw: hostname ``trusted'' unknown
02500 allow ip from 192.168.0.0/24 to me
65000 count ip from any to any
65100 deny { tcp or udp } from any to any 135-139,445 in
65200 deny { tcp or udp } from any to any 1026,1027 in
65300 deny { tcp or udp } from any to any 1433,1434 in
65400 deny ip from any to 255.255.255.255
65500 deny ip from any to 224.0.0.0/24 in
65500 deny udp from any to any 520 in
65500 deny tcp from any 80,443 to any 1024-65535 in
65500 deny ip from any to any
Firewall rules loaded.
/etc/rc: WARNING: $xconfig_enable is not set properly - see rc.conf(5).
Updating motd:.
Clearing /tmp.
Updating /var/run/os-release done.
Creating and/or trimming log files.
Starting syslogd.
Jun 24 22:11:19 claudville kernel: [drm] failed to load ucode RLC_RESTORE_LIST_CNTL(0x28) <4>[drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF300F)
Jun 24 22:11:19 claudville kernel: [drm] failed to load ucode RLC_RESTORE_LIST_GPM_MEM(0x29) <4>[drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF000F)
Jun 24 22:11:19 claudville kernel: [drm] failed to load ucode RLC_RESTORE_LIST_SRM_MEM(0x2A) <4>[drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF000F)
Starting default moused.
Mounting late filesystems:.
Starting dbus.
Starting avahi-daemon.
Starting cupsd.
Starting avahi-dnsconfd.
sysctl: unknown oid 'hw.usb.uaudio.default_channels' at line 20
Performing sanity check on sshd configuration.
Starting sshd.
Starting cron.
Configuring vt: keymap.
Starting lightdm.
Starting background file system checks in 60 seconds.

Wed Jun 24 22:11:20 EDT 2026
Jun 24 22:11:20 claudville lightdm[2814]: gkr-pam: unable to locate daemon control file
Jun 24 22:11:30 claudville lightdm[2842]: gkr-pam: unable to locate daemon control file
Jun 24 22:11:30 claudville syslogd: last message repeated 1 times
`

Edward1978

tsesani ```Welcome to fish, the friendly interactive shell
Type help for instructions on how to use fish
nick@nick-ghostbsd ~> dmesg -a
---<<BOOT>>---
Copyright (c) 1992-2025 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 15.0-RELEASE-p8 n230757-7c63d58780d2 GENERIC amd64
FreeBSD clang version 19.1.7 (llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2)
VT(vga): resolution 640x480
CPU: AMD Ryzen 7 5800X 8-Core Processor (3793.00-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0xa20f12 Family=0x19 Model=0x21 Stepping=2
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x7ef8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
AMD Features2=0x75c237ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX,ADMSKX>
Structured Extended Features=0x219c97a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,SHA>
Structured Extended Features2=0x40069c<UMIP,PKU,OSPKE,VAES,VPCLMULQDQ,RDPID>
Structured Extended Features3=0x10<FSRM>
XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
AMD Extended Feature Extensions ID EBX=0x111ef657<CLZERO,IRPerf,XSaveErPtr,RDPRU,BE,WBNOINVD,IBPB,INT_WBINVD,IBRS,STIBP,STIBP_ALWAYSON,PREFER_IBRS,SAMEMODE_IBRS,NOLMSLE,SSBD,PSFD>
SVM: (disabled in BIOS) NP,NRIP,VClean,AFlush,DAssist,NAsids=32768
TSC: P-state invariant, performance statistics
real memory = 34359738368 (32768 MB)
avail memory = 33409531904 (31861 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I >
FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs
FreeBSD/SMP: 1 package(s) x 8 core(s) x 2 hardware threads
random: registering fast source Intel Secure Key Seed
random: fast provider: "Intel Secure Key Seed"
random: unblocking device.
ioapic0 <Version 2.1> irqs 0-23
ioapic1 <Version 2.1> irqs 24-55
Launching APs: 1 3 4 14 11 13 6 9 15 10 5 2 12 7 8
random: entropy device external interface
kbd1 at kbdmux0
vtvga0: <VT VGA driver>
smbios0: <System Management BIOS> at iomem 0xf0600-0xf0617
smbios0: Entry point: v3 (64-bit), Version: 3.3
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256>
acpi0: <ALASKA A M I >
acpi0: Power Button (fixed)
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 350
Event timer "HPET2" frequency 14318180 Hz quality 350
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 1.2 on pci0
pci1: <ACPI PCI bus> on pcib1
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfc7a0000-0xfc7a7fff irq 28 at device 0.0 on pci1
xhci0: 32 bytes context size, 64-bit DMA
xhci0: xECP capabilities <LEGACY,PROTO,PROTO,PROTO,DEBUG>
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
ahci0: <AMD 500 Series AHCI SATA controller> mem 0xfc780000-0xfc79ffff irq 29 at device 0.1 on pci1
ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
pcib2: <ACPI PCI-PCI bridge> irq 30 at device 0.2 on pci1
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 28 at device 8.0 on pci2
pci3: <ACPI PCI bus> on pcib3
re0: <Realtek PCIe 2.5GbE Family Controller> port 0xe000-0xe0ff mem 0xfc600000-0xfc60ffff,0xfc610000-0xfc613fff irq 28 at device 0.0 on pci3
re0: Using Memory Mapping!
re0: Using 1 MSI-X message
re0: version:1.101.00
re0: Ethernet address: 74:56:3c:cb:2a:51

This product is covered by one or more of the following patents:
US6,570,884, US6,115,776, and US6,327,625.
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: 74:56:3c:cb:2a:51
pcib4: <ACPI PCI-PCI bridge> irq 29 at device 9.0 on pci2
pci4: <ACPI PCI bus> on pcib4
pci4: <network> at device 0.0 (no driver attached)
pcib5: <ACPI PCI-PCI bridge> at device 3.1 on pci0
pci5: <ACPI PCI bus> on pcib5
vgapci0: <VGA-compatible display> port 0xf000-0xf07f mem 0xfb000000-0xfbffffff,0xd0000000-0xdfffffff,0xe0000000-0xe1ffffff irq 54 at device 0.0 on pci5
vgapci0: Boot video device
hdac0: <NVIDIA (0x228b) HDA Controller> mem 0xfc080000-0xfc083fff irq 55 at device 0.1 on pci5
pcib6: <ACPI PCI-PCI bridge> at device 7.1 on pci0
pci6: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> at device 8.1 on pci0
pci7: <ACPI PCI bus> on pcib7
pci7: <encrypt/decrypt> at device 0.1 (no driver attached)
xhci1: <AMD Matisse USB 3.0 controller> mem 0xfc200000-0xfc2fffff irq 39 at device 0.3 on pci7
xhci1: 64 bytes context size, 64-bit DMA
xhci1: xECP capabilities <LEGACY,PROTO,PROTO,PROTO,PROTO,PROTO,DEBUG>
usbus1 on xhci1
usbus1: 5.0Gbps Super Speed USB v3.0
hdac1: <AMD X570 HDA Controller> mem 0xfc400000-0xfc407fff irq 36 at device 0.4 on pci7
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Power Button> on acpi0
acpi_syscontainer0: <System Container> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
cpu0: <ACPI CPU> on acpi0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 16.
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
cpufreq0: <CPU frequency control> on cpu0
Timecounter "TSC-low" frequency 1896436840 Hz quality 1000
Timecounters tick every 1.000 msec
ugen0.1: <AMD XHCI root HUB> at usbus0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
hdacc0: <NVIDIA (0x009e) HDA CODEC> at cad 0 on hdac0
hdaa0: <NVIDIA (0x009e) Audio Function Group> at nid 1 on hdacc0
pcm0: <NVIDIA (0x009e) (HDMI/DP 8ch)> at nid 4 on hdaa0
pcm1: <NVIDIA (0x009e) (HDMI/DP 8ch)> at nid 5 on hdaa0
pcm2: <NVIDIA (0x009e) (HDMI/DP 8ch)> at nid 6 on hdaa0
pcm3: <NVIDIA (0x009e) (HDMI/DP 8ch)> at nid 7 on hdaa0
hdacc1: <Realtek ALC1220 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC1220 Audio Function Group> at nid 1 on hdacc1
pcm4: <Realtek ALC1220 (Rear Analog)> at nid 20 and 24,26 on hdaa1
pcm5: <Realtek ALC1220 (Front Analog)> at nid 27 and 25 on hdaa1
ugen1.1: <AMD XHCI root HUB> at usbus1
Trying to mount root from zfs:zroot/ROOT/26.1-R15.0p2-2026-04-20_132053 []...
uhub0 on usbus0
uhub0: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub1 on usbus1
uhub1: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ST9250315AS 0010LVM1> ATA8-ACS SATA 2.x device
ada0: Serial Number 6VC416AN
ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 238475MB (488397168 512 byte sectors)
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <CT1000MX500SSD1 M3CR045> ACS-3 ATA SATA 3.x device
ada1: Serial Number 2304E6A2F5CC
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada1: Command Queueing enabled
ada1: 953869MB (1953525168 512 byte sectors)
ada2 at ahcich2 bus 0 scbus2 target 0 lun 0
ada2: <CT1000BX500SSD1 M6CR061> ACS-3 ATA SATA 3.x device
ada2: Serial Number 2532E9C86912
ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada2: Command Queueing enabled
ada2: 953869MB (1953525168 512 byte sectors)
uhub1: 8 ports with 8 removable, self powered
uhub0: 14 ports with 14 removable, self powered
ugen1.2: <Microsoft Microsoft Classic IntelliMouse> at usbus1
usbhid0 on uhub1
usbhid0: <Microsoft Microsoft Classic IntelliMouse, class 0/0, rev 2.00/0.40, addr 1> on usbus1
hidbus0: <HID bus> on usbhid0
usbhid1 on uhub1
usbhid1: <Microsoft Microsoft Classic IntelliMouse, class 0/0, rev 2.00/0.40, addr 1> on usbus1
hidbus1: <HID bus> on usbhid1
ugen0.2: <ITE Tech. Inc. ITE Device> at usbus0
usbhid2 on uhub0
usbhid2: <ITE Tech. Inc. ITE Device, class 0/0, rev 2.00/0.01, addr 1> on usbus0
hidbus2: <HID bus> on usbhid2
ugen1.3: <SEMICO USB Keyboard> at usbus1
usbhid3 on uhub1
usbhid3: <SEMICO USB Keyboard, class 0/0, rev 1.10/1.10, addr 2> on usbus1
hidbus3: <HID bus> on usbhid3
hkbd0: <SEMICO USB Keyboard> on hidbus3
kbd2 at hkbd0
usbhid4 on uhub1
usbhid4: <SEMICO USB Keyboard, class 0/0, rev 1.10/1.10, addr 2> on usbus1
hidbus4: <HID bus> on usbhid4
ugen0.3: <Realtek Bluetooth Radio> at usbus0
Setting hostuuid: 03560274-043c-05cb-2a06-510700080009.
Setting hostid: 0xe722091a.
Starting file system checks:
Mounting local filesystems:.
Loading kernel modules: linux linux64 cuse fusefs hgame nvidia-modeset
Cuse v0.1.37 @ /dev/cuse
nvidia0: <NVIDIA GeForce RTX 3060 Ti> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 595.71.05 Fri Apr 24 05:53:50 UTC 2026
Autoloading module: acpi_wmi
Autoloading module: hcons
Autoloading module: hms
Autoloading module: hsctrl
Autoloading module: if_rtw89
Autoloading module: intpm
intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0
smbus0: <System Management Bus> on intsmb0
rtw890: <rtw89_8852ce> port 0xd000-0xd0ff mem 0xfc500000-0xfc5fffff irq 29 at device 0.0 on pci4
rtw890: successfully loaded firmware image 'rtw89/rtw8852c_fw-2.bin'
rtw890: loaded firmware rtw89/rtw8852c_fw-2.bin
rtw890: Firmware version 0.27.129.4 (3f1a5302), cmd version 0, type 1
rtw890: Firmware version 0.27.129.4 (3f1a5302), cmd version 0, type 3
rtw890: chip rfe_type is 1
rtw890: Firmware element BB version: fffffe0178b638d8h
rtw890: Firmware element radio A version: fffffe0178b68e38h
rtw890: Firmware element NCTL version: fffffe0178ba9fa8h
rtw890: Firmware element TXPWR version: fffffe0178bad738h
rtw890: Firmware element PWR_TRK version: fffffe0178c10dc8h
rtw890: Firmware element REGD version: fffffe0178c11228h
rtw890: rfkill hardware state changed to enable
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: cannot find EC device
acpi_wmi0: Embedded MOF found
acpi_wmi1: <ACPI-WMI mapping> on acpi0
acpi_wmi1: cannot find EC device
acpi_wmi1: Embedded MOF found
hms0: <Microsoft Microsoft Classic IntelliMouse> on hidbus0
hms0: 5 buttons and [XYW] coordinates ID=26
hcons0: <SEMICO USB Keyboard Consumer Control> on hidbus4
hsctrl0: <SEMICO USB Keyboard System Control> on hidbus4
ELF ldconfig path: /lib /usr/lib /usr/local/lib /usr/local/lib/compat/pkg /usr/local/lib/compat /usr/local/lib/compat/pkg /usr/local/lib/e2fsprogs /usr/local/lib/gcc13 /usr/local/lib/gcc14 /usr/local/lib/perl5/5.42/mach/CORE /usr/local/lib/qt5 /usr/local/lib/qt6 /usr/local/lib/samba4 /usr/local/llvm19/lib /usr/local/llvm19/lib/x86_64-portbld-freebsd15.0
32-bit compatibility ldconfig path: /usr/lib32 /usr/local/lib32/compat /usr/local/lib32/gcc13 /usr/local/lib32/gcc14
Setting hostname: nick-ghostbsd.
Setting up harvesting: PURE_RDSEED,RANDOMDEV,[CALLOUT],[UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,[NET_ETHER],NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED
Feeding entropy: .
eval: /usr/sbin/mixer: not found
eval: /usr/sbin/mixer: not found
eval: /usr/sbin/mixer: not found
eval: /usr/sbin/mixer: not found
eval: /usr/sbin/mixer: not found
eval: /usr/sbin/mixer: not found
wlan0: Ethernet address: bc:c7:46:9b:ce:c9
lo0: link state changed to UP
re0: link state changed to UP
Starting wpa_supplicant.
Starting Network: lo0 re0 wlan0.
lo0: flags=1008049<UP,LOOPBACK,RUNNING,MULTICAST,LOWER_UP> metric 0 mtu 16384
options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
groups: lo
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
re0: flags=1008843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,LOWER_UP> metric 0 mtu 1500
options=60251b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,TSO4,LRO,WOL_MAGIC,RXCSUM_IPV6,TXCSUM_IPV6>
ether 74:56:3c:cb:2a:51
media: Ethernet autoselect (1000baseT <full-duplex,rxpause,txpause>)
status: active
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
wlan0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=0
ether bc:c7:46:9b:ce:c9
groups: wlan
ssid "" channel 1 (2412 MHz 11b)
regdomain FCC country US authmode OPEN privacy OFF txpower 30 bmiss 7
scanvalid 60 wme bintval 0
parent interface: rtw890
media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
status: no carrier
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
Starting webcamd.
Starting devd.
Starting event4 moused.
rtlbtfw: rtlbt_fw_read: open: /usr/local/share/rtlbt-firmware/rtl8852cu_fw_v2.bin: No such file or directory
Autoloading module: ng_ubt
Starting event5 moused.
Starting event6 moused.
Starting event7 moused.
Starting dhclient.
DHCPDISCOVER on re0 to 255.255.255.255 port 67 interval 8
DHCPOFFER from 192.168.0.1
DHCPREQUEST on re0 to 255.255.255.255 port 67
DHCPACK from 192.168.0.1
bound to 192.168.0.83 -- renewal in 3600 seconds.
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled
sysctl: unknown oid 'hw.usb.uaudio.default_channels' at line 20
Flushed all rules.
00100 allow ip from any to any via lo0
00200 deny ip from any to 127.0.0.0/8
00300 deny ip from 127.0.0.0/8 to any
00400 deny ip from any to ::1
00500 deny ip from ::1 to any
00600 allow ipv6-icmp from :: to ff02::/16
00700 allow ipv6-icmp from fe80::/10 to fe80::/10
00800 allow ipv6-icmp from fe80::/10 to ff02::/16
00900 allow ipv6-icmp from any to any icmp6types 1
01000 allow ipv6-icmp from any to any icmp6types 2,135,136
00000 check-state :default
01200 allow tcp from me to any established
00000 allow tcp from me to any setup keep-state :default
00000 allow udp from me to any keep-state :default
00000 allow icmp from me to any keep-state :default
00000 allow ipv6-icmp from me to any keep-state :default
01700 allow udp from 0.0.0.0 68 to 255.255.255.255 67 out
01800 allow udp from any 67 to me 68 in
01900 allow udp from any 67 to 255.255.255.255 68 in
02000 allow udp from fe80::/10 to me 546 in
02100 allow icmp from any to any icmptypes 8
02200 allow ipv6-icmp from any to any icmp6types 128,129
02300 allow icmp from any to any icmptypes 3,4,11
02400 allow ipv6-icmp from any to any icmp6types 3
65000 count ip from any to any
65100 deny { tcp or udp } from any to any 135-139,445 in
65200 deny { tcp or udp } from any to any 1026,1027 in
65300 deny { tcp or udp } from any to any 1433,1434 in
65400 deny ip from any to 255.255.255.255
65500 deny ip from any to 224.0.0.0/24 in
65500 deny udp from any to any 520 in
65500 deny tcp from any 80,443 to any 1024-65535 in
65500 deny ip from any to any
Firewall rules loaded.
route: message indicates error: File exists
add host 127.0.0.1: gateway lo0 fib 0: route already in table
route: message indicates error: File exists
add host ::1: gateway lo0 fib 0: route already in table
add net fe80::: gateway ::1
add net ff02::: gateway ::1
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
/etc/rc: WARNING: $xconfig_enable is not set properly - see rc.conf(5).
Updating motd:.
Updating /var/run/os-release done.
Creating and/or trimming log files.
Clearing /tmp.
Recovering vi editor sessions:.
Starting syslogd.
Mounting late filesystems:.
Starting dbus.
Starting default moused.
Starting avahi-daemon.
Starting avahi-dnsconfd.
Starting cupsd.
Configuring vt: keymap blanktime.
sysctl: unknown oid 'hw.usb.uaudio.default_channels' at line 20
Starting cron.
Starting background file system checks in 60 seconds.
Starting lightdm.

Thu Jun 25 09:05:55 EDT 2026
Jun 25 09:06:03 nick-ghostbsd lightdm[2754]: gkr-pam: unable to locate daemon control file
Jun 25 09:06:34 nick-ghostbsd lightdm[2784]: gkr-pam: unable to locate daemon control file
Jun 25 09:06:35 nick-ghostbsd syslogd: last message repeated 1 times
Jun 25 09:06:47 nick-ghostbsd gnome-keyring-daemon[2791]: The PKCS#11 component was already initialized
Jun 25 09:06:47 nick-ghostbsd gnome-keyring-daemon[2791]: The SSH agent was already initialized
Jun 25 09:06:47 nick-ghostbsd gnome-keyring-daemon[2791]: The Secret Service was already initialized
nick@nick-ghostbsd ~~~

Maybe a new forum, where we can put long .log files or any file inbetween 2 ~~ to put something long in a scrollable box.

tsesani

Edward1978 I probably should not have posted that many lines.

Edward1978

tsesani Sorry, thought the whole thing would have been good incase I missed something. 😃