Suspend/resume

Share your ideas, questions or suggestions with us here.

Re: Suspend/resume

Postby NevilleGoddard » Fri Sep 29, 2017 7:59 pm

Hi, Achim.
1gb of ram is fine for FreeBSD, even with ZFS supposedly.
I don't know how heavy MATE is but with lightweight Xfce you should be OK.
NevilleGoddard
Developer
 
Posts: 355
Joined: Thu Dec 22, 2016 10:30 pm
Has thanked: 76 times
Been thanked: 45 times

Re: Suspend/resume


Re: Suspend/resume

Postby hank2000 » Sat Sep 30, 2017 8:20 am

Hi there

No big deal for excuse Neville, not every hardware gets along with every software. The most 'natural' thing in the world. :D
But I found out, my aging netbook harddrive isn t much relyable anymore, therefor could be the cause for the reboots, although there wasn t any since sept. 26th updates..
The only strange thing left, is the missing support for DVD burning, which works with Debian, Linux Mint 17 and W7 starter but not under GhostBSD, neither 10.3 nor 11.x!
Always ejects the media BEFORE actual burning process starts (ext. USB drive always)!

Best
Achim
hank2000
 
Posts: 227
Joined: Mon Sep 16, 2013 8:42 am
Has thanked: 14 times
Been thanked: 4 times

Re: Suspend/resume

Postby hank2000 » Sat Sep 30, 2017 8:23 am

NevilleGoddard wrote:Hi, Achim.
1gb of ram is fine for FreeBSD, even with ZFS supposedly.
I don't know how heavy MATE is but with lightweight Xfce you should be OK.

Yes mate.
That s my opinion as well. Always use XFCE therefor. On openSuSe as well.
Only heavy video usage brings system in stress but that s clear... ;)
Best
Achim
hank2000
 
Posts: 227
Joined: Mon Sep 16, 2013 8:42 am
Has thanked: 14 times
Been thanked: 4 times

Re: Suspend/resume

Postby frogprince » Sun Oct 08, 2017 2:38 pm

On my 11.1 system, "suspend" will suspend, but not reawaken; I have to force the hardware to shut down and then reboot. I've had difficulty with acpi-related functions in the past with both BSD and Linux, and did some fair research. My conclusion was that anything acpi-related depends strongly on the bios or UEFI version, and is therefore hardware dependent. In my case, my boot time from mobo screen to MATE is about 75 seconds, so I've simply gotten into the habit of shutting it down. No distribution can test all the possible hardware configs.
Vas you efer in Zinzinnati? Asus M2N-MX, Athlon 64 3800+ CPU, 4 GB/250 GB, GeForce 210, missing front drive panel just like its owner.
frogprince
 
Posts: 36
Joined: Mon Jul 10, 2017 8:50 pm
Has thanked: 7 times
Been thanked: 3 times

Previous

Return to Feedback

Who is online

Users browsing this forum: No registered users and 3 guests

cron