ugen0.1: <Intel EHCI root HUB> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA)
ugen1.1: <Intel EHCI root HUB> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA)
ugen0.2: <vendor 0x8087 product 0x0024> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA)
ugen1.2: <vendor 0x8087 product 0x0024> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA)
ugen1.3: <vendor 0x0bda product 0x8191> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (500mA)
ugen0.3: <Generic USB2.0-CRW> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (500mA)
ugen0.4: <Importek TOSHIBA Web Camera> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (500mA)
ugen1.4: <Maxtor OneTouch> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (2mA)
A more full device description including company names like RealTek
ugen1.3: <vendor 0x0bda product 0x8191> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (500mA)
bLength = 0x0012
bDescriptorType = 0x0001
bcdUSB = 0x0200
bDeviceClass = 0x0000 <Probed by interface class>
bDeviceSubClass = 0x0000
bDeviceProtocol = 0x0000
bMaxPacketSize0 = 0x0040
idVendor = 0x0bda
idProduct = 0x8191
bcdDevice = 0x0200
iManufacturer = 0x0001 <Realtek>
iProduct = 0x0002 <802.11n WLAN Adapter>
iSerialNumber = 0x0000 <no string>
bNumConfigurations = 0x0001
List the kernel modules loaded into kernel memory. You might need
kldunload and
kldload commands also.
fred@kliktel ~> kldstat
Id Refs Address Size Name
1 68 0xffffffff80200000 1d3f000 kernel
2 2 0xffffffff8222d000 c894 opensolaris.ko
3 1 0xffffffff8223b000 392db1 zfs.ko
4 1 0xffffffff82821000 a7dd linprocfs.ko
5 3 0xffffffff8282c000 7a2b linux_common.ko
6 1 0xffffffff82834000 12a2b geom_mirror.ko
7 1 0xffffffff82847000 fe29 geom_journal.ko
8 1 0xffffffff82857000 1110c geom_eli.ko
9 1 0xffffffff82869000 4042a linux.ko
10 1 0xffffffff828aa000 3afad linux64.ko
11 1 0xffffffff828e5000 1032c iscsi.ko
12 1 0xffffffff828f6000 97f41 i915kms.ko
13 1 0xffffffff8298e000 55088 drm2.ko
14 4 0xffffffff829e4000 273b iicbus.ko
15 1 0xffffffff829e7000 1cf7 iic.ko
16 1 0xffffffff829e9000 1e6b iicbb.ko
17 2 0xffffffff829eb000 1c048 if_rtwn.ko
18 1 0xffffffff82a08000 bf38 if_rtwn_pci.ko
fred@kliktel ~>
If you have to load kernel modules, use the
kldload command.
or
or for older FreeBSD before revision r307529, use
device driver with Edimax EW-7811un contains an RealTek RTL8192CU USB device .
What version of GhostBSD or FreeBSD are you currently running? Is the device driver you need, functional with this release version of FreeBSD? r310386M
fred@kliktel ~> uname -a
FreeBSD kliktel.ghostbsd-pc.home 12.0-CURRENT FreeBSD 12.0-CURRENT #1 r310386M: Thu Dec 22 19:08:02 PST 2016 kliktel.ghostbsd-pc.home:/usr/obj/usr/src/sys/GENERIC amd64
fred@kliktel ~>